Solar Drying System for Agricultural Waste Sludge(Part 2). Discharge and drying process of sludge from a rotary drum solar dryer.:Discharge and drying process of sludge from a rotary drum solar dryer
スポンサーリンク
概要
- 論文の詳細を見る
A proposed solar drying system which consists of a solar housing and a perforated rotary drum dryer was studied to clarify the rapid drying of the sludge while being discharged from the drum. The sludge was pushed out gradually through small holes around the periphery while the drum was rotating. Sludge movement and discharge were observed with a video camera using a drum made from transparent flexiglass. The following findings discuss the relationship between the sludge discharge, hole size and the drum speed.1. The sludge was carried up with the rotation of the drum up to a certain angle. This motion was explained by the friction between the inner surface of the drum and the sludge. The angle of repose in the drum was calculated with the theoretical model when the rotating rate of the drum was low. At high rotating rate, the angle of the repose was larger because the sludge did not slip on the drum surface and the slipping occurred only within the sludge layer.2. The amount of the discharged sludge was proportional to the 1.9th power of the hole diameter and to the 0.53th power of rotation rate of the drum. The discharge was independent of the sludge height in the drum.3. The drying rate during the discharge process was measured using the formed samples. The rate was proportional to the square root of the Reynolds number while evaporation was proportional to the 1.5th power of the bar diameter.4. The hole diameter must be smaller because drying rate was higher at smaller bar diameter. Sludge particle diameter and admixtures must be considered in selecting the best hole diameter.
- 農業施設学会の論文
農業施設学会 | 論文
- 床勾配の異なる2種類のストールにおける乳牛の動作・行動
- 異なる光質環境下におけるトマト苗の発現タンパク質の配置の特徴
- 飢餓環境下におけるトマト苗のタンパク質発現データの配置情報の特徴
- 植物栽培環境スクリーニングのための2次元電気泳動の試み : 光質の異なる環境下におけるペチュニアのタンパク質解析例
- 包装条件の違いがイチゴ果実の損傷に及ぼす影響