急冷凝固したAl-2.75%Cr合金の析出
スポンサーリンク
概要
- 論文の詳細を見る
Microstuctures of Al-Cr alloys containing Cr up to 10% solidified by various cooling methods and precipitation behavior during aging at 200-600°C of a melt spun Al-2.75%Cr alloy were investigated. No precipitates can be observed in splat quenched Al-10%Cr nor in melt spun Al-2.75% alloys. The hardness of chill cast alloys increases with Cr content up to about 4%. Electrical resistivity of the melt spun 2.75% Cr alloy shows a two stage sigmoidal recovery during isothermal aging at 200-600°C. Electron microscopy observation of aged samples concludes that the first and the second stages of electrical resistivity change correspond to preferred precipitaion at grain boundaries and within grains, respectively. The size R, half of the length, and S, thickness of the grain boundary precipitated particles during isothermal aging are proportional to tn, where t is isothermal aging time. The time dependent exponent n for R and S are 0.077-0.083 and 0.11-0.17, respectively.
- 一般社団法人 軽金属学会の論文
一般社団法人 軽金属学会 | 論文
- Mechanical and wear properties of SiC whisker/ADC12 aluminum alloy composites fabricated by die casting.
- Joining of aluminum and ceramics.
- タイトル無し
- Undercooling and solidification behavior of fluid clumps of second-poured melt of hypereutectic Al-Si alloy in Duplex Casting process.
- Change in apparent viscosity of stirred slurry during production of semi-solid hypereutectic Al-Si alloy by slurry-melt mixing process.