異種材料一体化成形による焼結軸受の製造技術
スポンサーリンク
概要
- 論文の詳細を見る
To develop the composite journal bearings (CJB) with high strength and high wear resistance, two different mixed powders were compacted in the shape of a double-layers cylinder. A mixed powder of Fe-Cu was used for an outer layer as back-up material. In inner layer, the mixed powder of Fe-Ni-Mo-Cu was used for wear resistance. The compacted cylindrical bearing was sintered at various temperatures. EPMA analysis was conducted to identify the distribution of elemental composition near the interface between the inner and outer layers. As a result, it was confirmed that the joining between the inner and outer layers in the CJB was achieved by a diffusion mechanism and the hardness increased with increasing the sintering temperature. After the sizing process, the CJB became higher circularity than journal bearing made by conventional P/M process.