Oxygen Reduction Reaction of Ta-C-N Prepared by Reactive Sputtering with Heat Treatment
スポンサーリンク
概要
- 論文の詳細を見る
Ta-C-N electrocatalysts were prepared by reactive R.F. sputtering with heat treatment in the temperature range from 70 to 800°C. The Ta-C-N was found to have high electrochemical stability in 0.1 mol dm−3 H2SO4. The catalytic activity for the oxygen reduction reaction of the sputtered Ta-C-N increased with the increasing heat treatment temperature. In particular, the current of the ORR on the Ta-C-N with the heat treatment temperature of 800°C was observed at about 0.73 V vs. RHE. It was found that the crystallinity of the Ta-C-N would affect the catalytic activity for the ORR.
- 公益社団法人 電気化学会の論文
著者
-
KIM Jin-Hwan
Chemical Energy Laboratory, Yokohama National University
-
KAMIYA Nobuyuki
Chemical Energy Laboratory, Yokohama National University
-
Kim Jin-hwan
Chemical Energy Laboratory Yokohama National University
-
Ota Ken-ichiro
Chemical Energy Laboratory Yokohama National University
-
Ishihara Akimitsu
Chemical Energy Laboratory Yokohama National University
-
MITSUSHIMA Shigenori
Chemical Energy Laboratory, Graduate School of Engineering, Yokohama National University
関連論文
- New Non-platinum Cathode Based on Chromium for PEFC
- Tantalum-based Compounds Prepared by Reactive Sputtering as a New Non-platinum Cathode for PEFC
- Fuel Cells : Past, Present and Future
- Solubilities of La and Ni on LaNiO_3 in Li/K Carbonate Eutectic with La_2O_3
- Oxygen Reduction Reaction of Ta-C-N Prepared by Reactive Sputtering with Heat Treatment
- Quantitative Analysis of Electrooxidation Products on Platinum for Direct Ethanol Fuel Cell
- Solubility of Platinum in Acidic Media (I)—in Sulfuric Acid
- Zirconium Oxide-Based Compounds as Non-Pt Cathode for Polymer Electrolyte Fuel Cell