クリープ破断寿命への切欠き底部における変形挙動の依存性
スポンサーリンク
概要
- 論文の詳細を見る
The object of the investigation was to examine the dependence of creep strain in root of notch on the creep rupture life for the round bar with the circumferential V-notch during the short-time creep at high temperature. In the long-time creep under the low stress, it is possible to estimate the stress and strain distributions of notch root only from the creep deformation. However, it is necessary to sufficiently consider the plastic deformation under the creep of the load of the relatively high stress, since elastic, plastic and creep deformation are dependent on each other. In this study, the tensile creep rupture tests of the circumferential 60° V-notched bar for a type SUS 304 stainless steel were carried out at 873K in the air, and in order to discussed the deformation at the notch root under short-time creep in the laboratory, elasticity, plasticity and creep analysis were carried out using a finite element method (FEM). The elongation of the notch groove was measured under creep test and compared with the results of FEM analysis using the plastic and creep constitutive equations which were determined from the tension test and the tensile creep testing of smooth specimen. A considerably good agreement is obtained between the numerically computed and the experimentally observed plastic and creep deformation behaviors of the notched bars under constant loading, and the conclusion was got like that the mean creep strain rate between the edges of the V-shaped notch governs creep deformation and rupture under highly constrained deformation in tri-axial states of stress.
著者
関連論文
- 4011 SUS316FR鋼を用いた環状切欠き材の低サイクル疲労に及ぼす応力波形の影響(S25-2 疲労・クリープ疲労,S25 材料・構造の非弾性挙動・高温強度・損傷評価)
- 4009 応力制御の多軸負荷における1070アルミニウムの低サイクル疲労寿命(S25-2 疲労・クリープ疲労,S25 材料・構造の非弾性挙動・高温強度・損傷評価)
- 2225 硬さ試験に及ぼす2点間距離の影響(S03-1 材料の塑性挙動の構成式のモデル化とシミュレーション(1),S03 材料の塑性挙動の構成式のモデル化とシミュレーション)
- 球面に対するVickers硬さ評価法に関する研究(OS8-4 衝撃・高速破壊,OS8 実験力学の新たな発展)
- 642 ロックウエルスーパフィッシャル硬さに及ぼす非弾性材料定数の影響
- 環状切欠き材の高温多軸クリープ疲労
- 切欠材の塑性拘束と局部ひずみの推定法
- 225 多軸応力下における環状切欠き材のクリープ・疲労(多軸応力下の挙動)
- 704 非比例低サイクル疲労に及ぼすひずみ経路履歴の影響
- 203 非比例低サイクル疲労に及ぼす負荷経路履歴の影響
- ロックウエルスーパーフィッシャル硬さに及ぼす弾塑性構成関係の影響
- ビッカース硬さに及ぼす非弾性材料定数の影響について(OS8-3 超音波とマイクロ・ナノ計測,OS8 実験力学の新たな発展)
- 501 FEMを用いたロックウエルスーパーフィッシャル硬さに及ぼす非弾性構成関係の影響(GS-14 非弾性・塑性(1))
- 514 FEM を用いたビッカース硬さに関する研究 : マイヤー則に及ぼす弾塑性材料定数の影響
- 513 FEM を用いたロックウエル C スケール硬さに及ぼす構成関係の影響
- 344 非比例低サイクル疲労に及ぼす温度ならびにひずみ速度の影響(GS-7 疲労(2))
- FEMを用いたブリンネル硬さに及ぼす構成関係の影響 : (マイヤー則に及ぼす非弾性材料定数の影響)
- 303 SUS316FR 鋼を用いた非比例低サイクル疲労の温度依存性
- FEMを用いたロックウエル硬さに及ぼす構成関係の影響 : 第2報, ロックウエルAスケールの場合
- 415 FEM を用いたブリンネル硬さに関する研究 : マイヤー則に及ぼす非弾性材料定数の影響
- FEMを用いたロックウエル硬さに及ぼす構成関係の影響
- 112 非比例低サイクル疲労に及ぼすひずみ速度依存性(材料力学IV)
- 101 高温下における非比例低サイクル疲労のひずみ速度依存性(材料力学I)
- 239 二軸低サイクル疲労寿命およびき裂伝ぱ挙動に及ぼす温度依存性に関する研究(高温疲労)
- OS0704 応力制御下における1070アルミニウムおよびSUS304ステンレス鋼の多軸低サイクル疲労寿命(OS07-01 多軸疲労,OS07 多軸疲労および多軸クリープ)
- 737 応力制御下におけるSUS304ステンレス鋼および1070アルミニウムの非比例多軸低サイクル疲労寿命評価(疲労寿命・評価,疲労損傷の機構解明と評価,オーガナイスドセッション1)
- クリープ破断寿命への切欠き底部における変形挙動の依存性
- 高温における組合せ応力下の環状疲労き裂伝ぱに関する研究