Development of a Generation Mechanism of Synchronous Vibration Suitable for Hand-Held Vibrating Tools: Investigation of an Impact Model with Two Oscillators
スポンサーリンク
概要
- 論文の詳細を見る
The hand-arm vibration syndrome characterized by Raynauds disease is caused by long-term use of hand-held vibrating tools. The purpose of the present research is to develop a new vibrating tool using self-synchronization phenomena in order to reduce hand-arm vibration. In the present paper, an elementary model with a generation mechanism of synchronous vibration suitable for a tamping rammer used to compact cohesive soils on the ground is developed. This model consists of upper and lower blocks coupled by coil-springs, and two rotor-type oscillators are mounted individually on the lower blocks. The nonlinearity due to the impact behavior between the lower block and the ground is approximated by piecewise linear characteristics. The synchronized solutions and the stability are analyzed by applying the improved shooting method for impact vibration analysis. Analytical and experimental results confirm that stable synchronized solutions which are able to achieve a good balance between vibration control and excitation exist. In addition, it is proven that the existence region of the stable solutions can be expanded by setting the system parameters appropriately.
著者
-
Kondou Takahiro
Department Of Intelligent Machinery And Systems Kyushu University
-
BONKOBARA Yasuhiro
Department of Intelligent Machinery and Systems, Kyushu University
-
ONO Tomoki
Department of Mechanical Engineering, Faculty of Engineering, Kyushu University
-
ONO Tomoki
Department of Mechanical Engineering, Kyushu University
関連論文
- Nonlinear Pressure Wave Analysis by Concentrated Mass Model : (3rd Report, Modeling of Enlargement and Contraction Element)
- Forced Vibration Analysis of a Nonlinear Structure Connected in Series : Stability Analysis Based on the Argument Principle(Special Issue on Nonlinear Dynamics)
- PATTERN FORMATION PHENOMENA IN CONTACT ROTATING SYSTEMS (SIMPLIFIED METHOD FOR STABILITY ANALYSIS AND PREVENTION MEASURE BY USING ENERGY FACTOR)
- Development of a Generation Mechanism of Synchronous Vibration Suitable for Hand-Held Vibrating Tools: Investigation of an Impact Model with Two Oscillators
- Self-Synchronized Phenomena Generated in Coupled Nonlinear Self-Excited Oscillators with Stick-Slip Motion
- Modeling of Moving-Conductor Type Eddy Current Damper
- Self-Synchronized Phenomena Generated in Rotor-Type Oscillators: On the Influence of Coupling Condition between Oscillators
- Vibration Analysis of a Framework Structure by Generalized Transfer Stiffness Coefficient Method
- Self-Synchronized Phenomena Generated in Rotor-Type Oscillators: Investigation Using Nonlinear Normal Modes
- Synchronization Generated in Coupled Self-Excited Oscillators with Stick-Slip Motion: Coupling Condition between Oscillators for Existence Regions of Synchronization
- Nonlinear Pressure Wave Analysis by Concentrated Mass Model:(2nd Report, Modeling and Validity Verification of Branch Element)
- Study on Subspace Control Based on Modal Analysis (1st Report: Application to Swing-Up Control of an Inverted Pendulum System):(1st Report: Application to Swing-Up Control of an Inverted Pendulum System)