Estimation of Enthalpy Effects in Direct-Connect Dual-Mode Combustor
スポンサーリンク
概要
- 論文の詳細を見る
To estimate the enthalpy effects of test gas in a direct-connect dual-mode combustor, an experimental study was conducted. Wall pressures were compared under two cases with different types of air heater (combustion heater and electric heater) at various H2 fuel equivalence ratios. Considering flame holding, dual-mode transition and wall pressure value, matching total enthalpy was found to be more effective than matching total temperature in terms of mitigating vitiation effects in the case of a combustion heater. On the other hand, for vitiation flow, matching total temperature is more effective than matching total enthalpy for ignition to duplicate that of clean air flow. Therefore, flow total condition (total temperature or total enthalpy) should be selected according to experimental candidates.
著者
-
Masuya Goro
Department Of Aeronautics And Space Engineering Tohoku University
-
NODA Junji
Department of Aerospace Engineering, Tohoku University
-
TOMIOKA Sadatake
Japan Aerospace Exploration Agency, Kakuda Space Center
-
IZUMIKAWA Muneo
Japan Aerospace Exploration Agency, Kakuda Space Center
-
GOYNE C.
Department of Mechanical and Aerospace Engineering, University of Virginia
-
ROCKWELL R.
Department of Mechanical and Aerospace Engineering, University of Virginia
関連論文
- Effect of the Location of an Incident Shock Wave on Combustion and Flow Field of Wall Fuel-Injection
- Measurement of Fuel Concentration Profile at Leading Edge of Lifted Flame with Acetone Laser-Induced Fluorescence
- Measurement of Supersonic Injection Flowfield Using Acetone PLIF
- Estimation of Enthalpy Effects in Direct-Connect Dual-Mode Combustor
- 213 Prediction of the Whole Stress-strain Curve and Final Composite Strength of GFRP Cross-ply Laminates
- Turbulent Structure of Supersonic Flowfield with Transverse Injection
- Estimation of Mode Transition in a Supersonic Combustor