Counterpart Tests of SBLOCA on the Effect of Break Location with the ATLAS: DVI Nozzle versus Cold-Leg Breaks

スポンサーリンク

概要

• 論文の詳細を見る

• Results from two integral effect tests were compared to discuss the effect of break location between the direct vessel injection (DVI) nozzle and cold leg during the small-break loss of coolant accident (SBLOCA) scenario. One is the SB-DVI-09 test for a 6-inch (50% break area of a DVI nozzle) DVI line break and the other is the SB-CL-06 test for an equivalent break size of cold leg. Both counterpart tests were performed with the same control logic and initial/boundary conditions except for different break locations of the DVI line and cold leg. Experimental results showed that the maximum heater surface temperature increased more with the broken DVI nozzle (SB-DVI-09) than with the broken cold leg (SB-CL-06) due to the delayed and simultaneous occurrence of the loop seal clearing and the momentary decrease in the collapsed water level in the core region.

著者

• PARK Hyun-Sik

  Korea Atomic Energy Research Institute

• CHOI Ki-Yong

  Korea Atomic Energy Research Institute

• CHO Seok

  Korea Atomic Energy Research Institute

• KIM Yeon-Sik

  Korea Atomic Energy Research Institute

• Kang Kyoung-ho

  Korea Atomic Energy Res. Inst.

関連論文

• An Integral Effect Test on the LBLOCA Reflood Phenomena for the APR1400 Using ATLAS under a Best-Estimate Condition
• Experiments on the Heat Transfer and Natural Circulation Characteristics of the Passive Residual Heat Removal System for an Advanced Integral Type Reactor
• Experimental Investigations on In-Vessel Corium Retention through Inherent Gap Cooling Mechanisms
• Spacer Grid Effects during a Reflood in an Annulus Flow Channel
• Counterpart Tests of SBLOCA on the Effect of Break Location with the ATLAS: DVI Nozzle versus Cold-Leg Breaks
• Counterpart Tests of SBLOCA on the Effect of Break Location with the ATLAS : DVI Nozzle versus Cold-Leg Breaks

スポンサーリンク