Analytical study of thermal response similarity between simulated fuel rods and nuclear fuel rods during reflood phase of PWR-LOCA.
スポンサーリンク
概要
- 論文の詳細を見る
The applicability of the thermal response of an electrically heated simulated rod mostly used in loss-of-coolant-accident (LOCA) experiments to that of a nuclear fuel rod is a concern for the safety evaluation of a reactor. The present analysis describes the characteristics of the thermal response for both electrically heated and nuclear fuel rods during typical reflood conditions for a PWR-LOCA. A model describing the radial temperature field in the rod is developed based on the scheme in HETRAP code by Malang and incorporated into a reflood analysis code, REFLA for that purpose. <BR>The calculations applied to the existing reflood tests gave good agreement with experiments, showing the validity of the present model. The analysis has shown that the nuclear fuel rod tends to give a lower clad temperature and a sooner quench time than the electrically heated rod in a typical reflood condition, due to the smaller gap heat transfer and smaller heat capacity of the cladding. The thermal response of nuclear fuel rods was found to be well simulated by the use of an electrically heated rod with Zircaloy cladding and a clad-to-fuel gap.
- 一般社団法人 日本原子力学会の論文
著者
-
SUDOH Takashi
Jaban Atomic Energy Research Institute
-
SUGIMOTO Jun
Jaban Atomic Energy Research Institute
-
MURAO Yoshio
Jaban Atomic Energy Research Institute