The Spheroidization of Cementite in a Medium Carbon Steel by Means of Subcritical and Intercritical Annealing.

スポンサーリンク

概要

• 論文の詳細を見る

• The spheroidization of cementite at subcritical and intercritical temperatures was studied quantitatively by evaluation of a shape factor for the cementite particles. It was found that the degree of spheroidization, as determined by the values of the shape factor, was markedly accelerated by treatments consisting in either (1) subcritical annealing after cold deformation or (2) intercritical annealing followed by subcritical annealing. Nevertheless, some differences were found among the microstructures resulting from the above treatments, which were related to the mechanisms of cementite formation in each of them. Also, the kinetics of austenitization during intercritical annealing was found to be accelerated by previous deformation, and the analysis of the formation of austenite at intercritical temperatures in terms of an Avrami equation was consistent with an "effective" saturation of ferrite-pearlite boundaries with austenite nuclei, followed by a planar mode of growth into the pearlite nodules.

• The Iron and Steel Institute of Japanの論文

著者

• Morales R.

  Instituto Politecnico Nacional Department Of Metallurgy And Materials Engineering

• Hernández-Silva D.

  Instituto Politécnico Nacional, ESIQIE División de Ingeniería Metalúrgica y Sección de Graduados

• Cabañas-Moreno J.

  On leave at Toyohashi University of Technology

関連論文

• Hydration Kinetics of Recarbonized Lime
• Hydration Kinetics of Lime
• Physical Modelling of Tundish Plasma Heating and Its Mathematical Interpretation
• A Physical Model for the Two-phase Flow in a Continuous Casting Mold
• A DPIV Study of Liquid Steel Flow in a Wide Thin Slab Caster Using Four Ports Submerged Entry Nozzles
• A Mathematical Simulator for the EAF Steelmaking Process Using Direct Reduced Iron
• Physical and Mathematical Modeling of Steel Flow and Heat Transfer in Tundishes under Non-isothermal and Non-adiabatic Conditions
• Macro-Micro Modeling of the Dendritic Microstructure of Steel Billets Processed by Continuous Casting
• The Spheroidization of Cementite in a Medium Carbon Steel by Means of Subcritical and Intercritical Annealing.

スポンサーリンク