Copper Distribution between FeS-Alkaline or -Alkaline Earth Metal Sulfide Fluxes and Carbon Saturated Iron Melt.
スポンサーリンク
概要
- 論文の詳細を見る
Measurements have been made to study the effect of the addition of alkaline or alkaline earth metal sulfide such as Li2S, K2S, MgS, CaS, SrS or BaS to FeS on the copper distribution ratio between FeS flux and carbon saturated liquid iron at 1 673 K. Since each solubility of MgS and CaS in liquid FeS was limited, no apparent effect of MgS or CaS on the copper distribution ratio was observed. Similar to the effect of Na2S studied in our previous work, the addition of Li2S, K2S, SrS or BaS to FeS increased the copper distribution ratio, LCu=(mass%Cu) flux/[mass%Cu] Fe, and LCureached maximum value at certain content of these additives in each flux. The maximum values of LCu measured in each flux were 30, 20, 22 and 19 in FeS-LiS0.5, -KS0.5, -SrS and -BaS fluxes, respectively. The sulfur content in liquid iron also decreased by the addition of these sulfides to FeS.
- The Iron and Steel Institute of Japanの論文
著者
-
Ban-ya Shiro
Faculty Of Engineering Tohoku University
-
Nagasaka Tetsuya
Faculty of Engineering, Tohoku University
-
Wang Chao
Research Student, Research Institute of Mineral Dressing and Metallurgy, Tohoku University
-
Hino Mitsutaka
Faculty of Engineering, Tohoku University
関連論文
- Thermodynamics of the Deoxidation Equilibrium of Aluminum in Liquid Nickel and Nickel-Iron Alloys
- Equilibrium between Yttrium and Oxygen in Liquid Iron and Nickel
- Sulphide Capacities of CaO-Al2O3-MgO and CaO-Al2O3-SiO2 Slags.
- Activities of Tin and Antimony in Liquid Fe-S Alloy Saturated with Carbon.
- Phase Equilibria of Liquid Fe-S-C Ternary System.
- Copper Distribution between Molten FeS-NaS0.5 Flux and Carbon Saturated Iron Melt.
- Copper Distribution between FeS-Alkaline or -Alkaline Earth Metal Sulfide Fluxes and Carbon Saturated Iron Melt.