Liquid phase deposition process to deposit TiO2 in the porous Mg2SiO4 ceramics
スポンサーリンク
概要
- 論文の詳細を見る
We propose use of a liquid phase deposition method (LPD) to prepare the composite ceramics with no chemical reaction between the two phases. Mg2SiO4–TiO2 composite ceramics is desirable for microwave/millimeter-wave dielectric devices, because the appending TiO2 into Mg2SiO4 improves the temperature coefficient of resonant frequency (τf) to 0 ppm/°C. However, there is a problem that the secondary phases: MgSiO3 and MgTi2O5 are created during sintering at elevated temperatures. The presence of the secondary phase results in decrease of the quality factor (Q·f). To prevent the production of the secondary phase, we try to investigate another route to prepare the Mg2SiO4–TiO2 composite ceramics using a liquid phase deposition (LPD) process as follows: Porous Mg2SiO4 ceramics were prepared by sintering Mg2SiO4 with pore-forming agents. Then, TiO2 was deposited into the pores using LPD. In particular, this study focused on two conditions to deposit TiO2 in porous Mg2SiO4: (1) the firing temperature after depositing TiO2 in the porous Mg2SiO4 and (2) the concentration of the precursor solution for the LPD.
著者
-
KAGOMIYA Isao
Material Science and Engineering, Nagoya Institute of Technology
-
Ohsato Hitoshi
Materials Sci. And Engineering Nagoya Inst. Of Technol.
-
SUGIHARA Joshi
Materials Science and Engineering, Nagoya Institute of Technology
-
KAKIMOTO Ken-ichi
Materials Science and Engineering, Nagoya Institute of Technology
-
OHSATO Hitoshi
Materials Science and Engineering, Nagoya Institute of Technology
-
Kakimoto Ken-ichi
Materials Science and Engineering, Graduate School of Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555, Japan
-
KAGOMIYA Isao
Materials Science and Engineering, Nagoya Institute of Technology
関連論文
- Spiral Spin Structure in the Commensurate Magnetic Phase of Multiferroic RMn_2O_5(Condensed matter: electronic structure and electrical, magnetic, and optical properties)
- Liquid phase deposition process to deposit TiO2 in the porous Mg2SiO4 ceramics
- Oxygen permeation and microstructure of intergrowth perovskite Sr-La-Fe-Co based mixed-conductive ceramics
- Structure and Electrical Properties of Lead-Free (Na_K_)NbO_3-BaTiO_3 Ceramics
- Microwave Dielectric Properties of Ba_Sm_Ti_O_ (x=2/3) Ceramics Produced by Spark Plasma Sintering
- Microwave Dielectric Properties of (Ca1-xSrx)SiO3 Ring Silicate Solid Solutions
- Microwave Dielectric Properties of Perovskite-Like Structured Ba8Ta6(Ni1-xMx)O24 ($\textit{M}=\text{Co}$, Cu, and Zn) Solid Solutions
- Crystal Structure and Microwave Dielectric Properties of Aeschynite-Type $R$(W0.5Ti1.5)O6 ($R = \text{Nd}$, Sm, Eu, Gd and Dy) Ceramics
- Microwave Dielectric Properties of Textured BaLa4Ti4O15 Ceramics with Layered Perovskite Structure
- High-Q Microwave Dielectric SrTiO3-Doped MgTiO3 Materials with Near-Zero Temperature Coefficient of Resonant Frequency
- Enhancement of Internal Dielectric Constant of Metallodielectrics Made from Layers of Nonmagnetic Wires
- Quality Factor of Forsterite for Ultrahigh Frequency Dielectrics Depending on Synthesis Process
- Synthesis of Disordered Ba(Zn1/3Ta2/3)O3 by Spark Plasma Sintering and Its Microwave $Q$ Factor
- Synthesis and Crystal Structure–Microwave Dielectric Property Relations in Sn-Substituted Ca3(Zr1-xSnx)Si2O9 Solid Solutions with Cuspidine Structure
- Structure and Electrical Properties of Lead-Free (Na0.5K0.5)NbO3-BaTiO3 Ceramics