Characterization of the Spray of the DISI Multi-hole Injector by Means of Phase Doppler Anemometer
スポンサーリンク
概要
- 論文の詳細を見る
The spray from a multi-hole injector applied to direct injection spark ignition (DISI) engine was investigated. In order to understand the detailed structure of the transient spray near the nozzle a combined LDA/PDA system was used. PDA system was optimized in order to detect relative smaller droplets. Size-classified technique was used to get deep information about the spray characterizations near nozzle. The experiments were performed at 7 MPa of injection pressure. At early stage of spray the droplet velocity distribution in the centre of the spray showed high value. Smaller droplets under 15 µm showing followability to air flow, while larger droplets over 20 µm will have drag due to momentum decay. Droplets of 15 <D≤20 µm in diameter is criteria for follow/penetration near the nozzle. Near the nozzle, the atomization predominantly occurs at the centre region of the spray.
著者
-
Tomita Eiji
Okayama University
-
Kawahara Nobuyuki
Okayama University
-
Sumida Mamoru
Mitsubishi Electric Corp.
-
Ahmed Fatma
Okayama University
関連論文
- Characterization of the Spray of the DISI Multi-hole Injector by Means of Phase Doppler Anemometer
- TED-AJ03-403 COMBUSTION AND EXHAUST EMISSIONS IN A HYDROGEN FUELED ENGINE IGNITED WITH LIGHT OIL
- Ion Current in a Homogeneous Charge Compression Ignition Engine
- (2-08) Effects of Swirl Turbulent Flow Field and Inhomogeneous Concentration Field on Combustion of Fuel-Air Mixture in a Constant Volume Vessel((SI-3)S. I. Engine Combustion 3-Flow and Combustion)
- B307 Flame Propagation of Inhomogeneous Feel-Air Mixture with Swirl in a Constant-Volume Vessel(Turbulent flame-2)
- E308 A Study on Hydrogen Combustion Ignited with Light Oil in a Dual Fuel Engine(Engine performance)
- Liquid Sheet Break-up of High-Pressure Swirl Injector for DISI Engine(Spray Technologies, Atomization)
- Measurement of fuel concentration distribution of transient hydrogen jet and its flame using planar laser induced fluorescence method
- A New Method of Fractal Analysis Using Wavelet Transform and its Application in Tumbling Flow Analysis(Recent Combustion Technology in Internal Combustion Engines)
- Wavelet Transform Analysis of Unsteady Turbulence and Turbulent Burning Velocity in a Constant-Volume Vessel
- (2-07) Analysis of Fractal Characteristics of tumbling flow in a Spark Ignition Engine Using Wavelet Transform((SI-3)S. I. Engine Combustion 3-Flow and Combustion)
- TED-AJ03-397 HOMOGENEOUS CHARGE COMPRESSION IGNITION COMBUSTION WITH DIMETHYL ETHER : ANALYSIS OF TWO-STAGE HEAT RELEASE
- Knocking detection using wavelet instantaneous correlation method
- SC3-2: Effect of Nozzle Geometry on Atomization of Transient Spray from Port Fuel Injector(SC: Spray and Spray Combustion,General Session Papers)
- SC4-1: Spray Behavior near the Nozzle of a DISI Multi-Hole Injector Using Phase Doppler Anemometer(SC: Spray and Spray Combustion,General Session Papers)