Influence of Thermomechanical Processing on the Austenite–Pearlite Transformation in High Carbon Vanadium Microalloyed Steels
スポンサーリンク
概要
- 論文の詳細を見る
Multipass torsion tests were carried on with several V-microalloyed high carbon steels, using different deformation sequences in order to modify the austenite state prior to transformation. Both recrystallized and deformed austenite microstructures were studied. After deformation, different cooling rates were applied. The results show that accumulating strain in the austenite before transformation seems to slightly increase the interlamellar spacing for a given cooling rate, this increase being related to the pearlite transformation taking place at higher temperatures because of the increase in the austenite grain boundary area per unit volume (SV). On the other hand, the retained strain significantly contributes to a refinement of the “ferrite units”, this effect being more significant as vanadium and nitrogen contents rise. A relationship between the mean “ferrite unit” size with SV and cooling rate was determined. Similarly, empirical expressions to predict strength as a function of vanadium microalloying addition, SV and cooling rate were derived.
著者
-
Jorge-Badiola D.
CEIT and Tecnun (University of Navarra)
-
Iza-Mendia A.
CEIT and Tecnun (University of Navarra)
-
Rodriguez-Ibabe J.
CEIT and Tecnun (University of Navarra)
-
López B.
CEIT and Tecnun (University of Navarra)
関連論文
- Influence of Thermomechanical Processing on the Austenite–Pearlite Transformation in High Carbon Vanadium Microalloyed Steels
- Role of Vanadium Microalloying in Austenite Conditioning and Pearlite Microstructure in Thermomechanically Processed Eutectoid Steels
- Role of Vanadium Microalloying in Austenite Conditioning and Pearlite Microstructure in Thermomechanically Processed Eutectoid Steels
- Improved Model of Kinetics of Strain Induced Precipitation and Microstructure Evolution of Nb Microalloyed Steels during Multipass Rolling
- Effect of Mo on Dynamic Recrystallization Behavior of Nb-Mo Microalloyed Steels
- Modeling of Austenite Grain Size Distribution in Nb Microalloyed Steels Processed by Thin Slab Casting and Direct Rolling(TSDR) Route
- Interaction between Recrystallization and Precipitation during Multipass Rolling in a Low Carbon Niobium Microalloyed Steel
- Influence of the Prior Austenite Microstructure on the Transformation Products Obtained for C-Mn-Nb Steels after Continuous Cooling
- Influence of Thermomechanical Processing on the Austenite-Pearlite Transformation in High Carbon Vanadium Microalloyed Steels
- Static Recrystallization Behaviour of a Wide Range of Austenite Grain Sizes in Microalloyed Steels