軟鋼板とAl-Mg合金板の超音波接合

概要

論文の詳細を見る
Ultrasonic welding between SS400 mild steel sheet and aluminum alloy sheet containing magnesium (A5052) was conducted. In this study, authors investigated the influence of ultrasonic welding condition on the mechanical properties and the interface microstructure of a joint, and examined the effect of an insert metal to improve the joint strength. The main results obtained in this study are as follows. It was possible to ultrasonically weld SS400 mild steel sheet and A5052 sheet. When the clamping force was varied keeping the welding time constant for ls. the joint strength showed the maximum at the clamping force of 588N and it decreased with the clamping force because the frictional action at the interface decreased with it. When the clamping force was kept constant at 588N and the welding time was varied, the joint strength reached the maximum at the welding time of 2.5s, and the strength of the joint welded for 3s decreased due to the formation of Fe2Al5 intermetallic compound at the interface. Using an insert metal of commercially pure aluminum successfully improved the joint strength and the strength of the joint welded at the welding time of 3s was about three times that of the joint without an insert metal.
溶接学会の論文
2007-00-00