Formation of Exclusive Al2O3 Scale on Nb and Nb-Rich Alloys by Two-Step Oxygen-Aluminum Diffusion Process
スポンサーリンク
概要
- 論文の詳細を見る
External Al2O3 scale formation behavior by a diffusion aluminizing process on Nb and Nb-X (X = Mo, Re, and Ta) alloys with different oxygen solubilities was investigated. The oxygen content in Nb and Nb-X alloys was controlled by oxygen diffusion treatment at 1,100 A degrees C using Nb/NbO mixture. Nb-aluminide, NbAl3 and Nb2Al, layers were developed on the low-oxygen Nb substrate by an aluminum diffusion treatment using Al/Al2O3/NH4Cl mixture at 1,100 A degrees C; whereas an adhesive Al2O3 scale developed on the Nb substrate with higher oxygen content. The alloy oxygen content decreased by an addition of Ta, Mo and Re, in this order, and the decrease in alloy oxygen content resulted in the transition of Al2O3 formation from external scale to internal precipitates. This transition was not observed when low Al activity powder mixture, Ni50Al/Al2O3/NH4Cl, was used for Al diffusion process, and only external Al2O3 scale was developed on all samples. In the present study, the effects of oxygen solubility limit, oxygen content, and the activity of Al in diffusion process on the formation of Al2O3 scale will be discussed.
著者
-
Narita Toshio
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
Ukai Shigeharu
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
Hayashi Shigenari
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
関連論文
- The Effect of S and Mn on the High-temperature Oxidation and Scale Spallation Behavior of Low-carbon Steels
- Investigation of the Mechanism of Alloy Dendrite Deflection due to Flowing Melt by Phase-Field Simulation
- Analysis of Solidification Path of Fe-Cr-Ni Ternary Alloy
- Isothermal Solidification Behavior During the Transient Liquid Phase Bonding Process of Nickel Using Binary Filler Metals
- High-temperature carburization behaviour of HASTELLOY X in CH4 gas
- Refinement of Oxide Particles by Addition of Hf in Ni-0.5 mass% Al-1 mass% Y_2O_3 Alloys
- γ' Precipitation and Growth Kinetics in Mechanically Alloyed Ni-Al
- Hardness and Micro-Texture in Friction Stir Welds of a Nanostructured Oxide Dispersion Strengthened Ferritic Steel
- Oxide Particle Refinement in 4.5 mass%Al Ni-Based ODS Superalloys
- Hardness and Micro-Texture in Friction Stir Welds of a Nanostructured Oxide Dispersion Strengthened Ferritic Steel
- Grain Boundary Deformation at High Temperature Tensile Tests in ODS Ferritic Steel
- Formation of Exclusive Al2O3 Scale on Nb and Nb-Rich Alloys by Two-Step Oxygen-Aluminum Diffusion Process
- Recrystallization Texture of Cold-rolled Oxide Dispersion Strengthened Ferritic Steel
- Effects of Two-Step Cold Rolling on Recrystallization Behaviors in ODS Ferritic Steel
- Oxide Particle Refinement in 4.5 mass% Al Ni-Based ODS Superalloys