J044022 局所抵抗加熱を利用した複合材航空機構造の衝撃損傷診断([J04402]知的材料・構造システム(2))

概要

論文の詳細を見る
If it is possible to inspect composite aircraft automatically and quickly after every flight, we can reduce the safety factor and allow for more flights. Although, an electrical resistance change method (ERCM) has been proposed as a self-monitoring method which can inspect rapidly even a large structure without expensive equipments, there are many problems with its practical application. In this study, a new diagnostic method, impact-damage visualization, was developed. Indentation damage increases fiber庸iber contact at the interlaminar interface and electrical conductivity. Consequently, electrical current applied to the material will concentrate around the damaged area, and lead to selective and intense resistive heating. This temperature increase can be observed by thermography or detected as a change in electrical resistance caused by the temperature difference. The lightning protection system of a composite aircraft was used to apply a uniform electrical current distribution and electric heat to a large structure. Subsequent coupled thermal-electrical analyses showed that even small indentations (depth <0.15 mm) could be relatively easily detected in structures >1 m in size.
一般社団法人日本機械学会の論文
2011-09-11