SI2-3: Development and Application of Gasoline/EtOH Combustion Mechanism : Modeling of Direct Injection Ethanol Boosted Gasoline Engine(SI: Spark-Ignition Engine Combustion,General Session Papers)

スポンサーリンク

概要

• 論文の詳細を見る

• Ethanol could play an important role to reduce the use of fossil fuels in the automotive industry together with a substantial increase in the efficiency of direct injection gasoline engines. As suggested by Cohn, Bromberg, and Heywood, the concept of ethanol DI boosted gasoline engine can facilitate the high compression ratio engine operation by reducing the knock constraint. In this concept, the direct injection of ethanol was proposed as an effective knock suppressant. As described, a small amount of ethanol could be used to reach the engine efficiency corresponding to injection of larger (by 30 %) amount of gasoline. Gasoline consumption and out emissions would be reduced by 25%. The concept has been validated for the small bore model engine using the KIVA3V code supplemented by the detailed chemistry approach. The chemical mechanism for gasoline surrogate/ethanol blend was constructed consisting of 129 species participating in 700 reactions. The gasoline surrogate model was constructed using sub-mechanisms for constituent components (iso-octane, toluene, and n-heptane in a selected proportion) from classes of hydrocarbons typical for gasoline. The mechanism was validated using shock-tube auto-ignition data taken from Sakai (University of Tokyo) and Gauthier (Stanford University) data compilations. The sub-mechanism of ethanol combustion is described by the reduced mechanism of Marinov (LLNL). The KIVA3V code was modified to treat the chemical mechanism developed and allowing injections of different fuels. The numerical results illustrate the possible efficiency gain for the model DI gasoline engine with conventional compression ratio within the range of 10-20% by ethanol injection in 10-20% of the total amount of fuel.

• 一般社団法人日本機械学会の論文
• 2008-07-28

著者

• Golovitchev Valeri

  Department Of Applied Mechanics Chalmers University Of Technology

• Rinaldini Carlo

  DIMEC - Mechanical and Civil Engineering Department, University of Modena and Reggio Emilia

• Cantore Giuseppe

  DIMEC - Mechanical and Civil Engineering Department, University of Modena and Reggio Emilia

• Rinaldini Carlo

  Dimec - Mechanical And Civil Engineering Department University Of Modena And Reggio Emilia

関連論文

• SI2-3: Development and Application of Gasoline/EtOH Combustion Mechanism : Modeling of Direct Injection Ethanol Boosted Gasoline Engine(SI: Spark-Ignition Engine Combustion,General Session Papers)

スポンサーリンク