439 Fabrication of Metallic Coating onto CFRP Substrate by Cold Spray
スポンサーリンク
概要
- 論文の詳細を見る
Carbon fiber reinforced plastics (CFRP) has a great potential application in aircraft fuselage due to their high specific stiffness and specific strength. It is crucial to coat the CFRP surface with a high conductivity metal in order to reduce the effect of lightning strike on the aircraft. Thermal spray process can be used to produce coating on CFRP substrate. However, the volume resistivity of thermal sprayed coating is higher than that of its bulk metal. Moreover, the coating obtained is porous and has high oxidation content. The cold spray process is an attractive method to make a dense and tight coating without any detrimental effects acquired from the high temperature process. On this study, aluminium coating was successfully cold sprayed onto CFRP substrate with interlayer coating processed by plasma spray. The volume resistivity of coating was significantly lower than coating produced by plasma spray process
- 一般社団法人日本機械学会の論文
- 2010-11-27
著者
-
Fukumoto Masahiro
Toyohashi Univ. Of Technology
-
Yamada Motohiro
Toyohashi Univ. Technol.
-
Fukumoto Masahiro
Toyohashi University Of Technology Dept. Of Mechanical Engineering
-
AFFI JON
Toyohashi University of Technology
-
OKAZAKI Hiroki
Toyohashi University of Technology
-
Okazaki Hiroki
Department Of Mechanical Engineering Toyohashi University Of Technology
-
Affi Jon
Department Of Mechanical Engineering Toyohashi University Of Technology
-
Yamada Motohiro
Department Of Mechanical Engineering Toyohashi University Of Technology
関連論文
- Fabrication of AlN Coatings by Reactive Atmospheric Plasma Spray Nitriding of Al Powders
- Influence of Substrate Materials upon Fabrication of Aluminum Nitride Coatings by Reactive RF Plasma Spraying
- Fabrication of Silicon Nitride Thick Coatings by Reactive RF Plasma Spraying
- Synthesis of Titanium Dioxide Powders via Hydrolysis of Titanyl Sulphate for Cold Spray Coating
- Deposition of Copper Fine Particle by Cold Spray Process
- Repeated Thermal Shock Properties of Functionally Gradient Plasma Sprayed Coatings under the Temperature Gradient Condition
- Plasma Spraying of Metal-Ceramic Composite Powders Produced by MA Method
- 439 Fabrication of Metallic Coating onto CFRP Substrate by Cold Spray
- Fabrication of Aluminum Coating onto CFRP Substrate by Cold Spray
- Bonding behavior of cold sprayed Cu coating on SUS304 substrate
- Reactive Plasma Spraying of Aluminum Nitride Coating and its Properties
- Reactive Plasma Spraying of AlN/Al_2O_3 Feedstock Powder upon Fabrication of AlN coating
- Fabrication of Titanium Dioxide Photocatalyst Coatings by Cold Spray
- Preface
- Synthesis of Cubic Aluminum Nitride Coating from Al_2O_3 Powder in Reactive Plasma Spray Process
- Cold spray deposition on the thermoplastic and thermosetting polymer substrates : A comparative study