A105 DEVELOPMENT OF COMBUSTOR WITH EXHAUST GAS RECIRCULATION SYSTEM FOR THE NEXT GENERATION GAS TURBINE(Gas Turbine-2)
スポンサーリンク
概要
- 論文の詳細を見る
Under high temperature combustion, it is foreseen that very high levels of NOx are generated. In order to suppress the NOx increase, the Exhaust Gas Recirculation (EGR) system is applied to heavy duty gas turbine. The EGR system in a Gas Turbine Combined Cycle recirculates exhaust gas from the Heat Recovery Steam Generator outlet to the compressor inlet. This reduces the oxygen content of the mixed products of combustion with fresh air and therefore, reduces the NOx formation in the combustor. Unfortunately, the lower burning velocity of the mixture causes flame holding problems that may lead to unstable combustion. A novel combustor has been developed that provides good flame holding characteristics and reduces NOx. Intermediate pressure tests were carried out to confirm the NOx reductions in a simulated EGR environment. The results indicate a sharp decrease in NOx compared to a conventional Dry Low NOx combustor operating at similar high temperature.
- 一般社団法人日本機械学会の論文
- 2009-11-16
著者
-
Nishida Koichi
Takasago Machinery Works Mitsubishi Heavy Industries Ltd.
-
Ito Eisaku
Takasago Research & Development Center Mitsubishi Heavy Industries Ltd.
-
Saitoh Keijiro
Takasago Research & Development Center, Mitsubishi Heavy Industries, Ltd.
-
Tanimura Satoshi
Takasago Machinery Works, Mitsubishi Heavy Industries, Ltd.
-
Tsukagoshi Keizo
Takasago Machinery Works, Mitsubishi Heavy Industries, Ltd.
-
Saitoh Keijiro
Takasago Research & Development Center Mitsubishi Heavy Industries Ltd.
-
Tanimura Satoshi
Takasago Machinery Works Mitsubishi Heavy Industries Ltd.
-
Tsukagoshi Keizo
Takasago Machinery Works Mitsubishi Heavy Industries Ltd.
関連論文
- A105 DEVELOPMENT OF COMBUSTOR WITH EXHAUST GAS RECIRCULATION SYSTEM FOR THE NEXT GENERATION GAS TURBINE(Gas Turbine-2)
- A102 DEVELOPMENT OF ADVANCED TECHNOLOGIES FOR THE NEXT GENERATION GAS TURBINE(Gas Turbine-1)