Effect of commercially available bonding agents impregnated with fibers on bending strength of hybrid resin
スポンサーリンク
概要
- 論文の詳細を見る
To clarify the mechanical properties of fiber-reinforced hybrid resin bridges, this study evaluated the influence of various bonding agents ((Modeling Liquid (ML), DE Resin (DE), Bell Bond (BE), Mega Bond (MG), Durafil Bond (DU), Fluoro Bond (FB), Mac-Bond (MC), EG Bond (EG), Unifill Bond (UN), Single Bond (SN)) impregnated with fibers on bending strength. FB attained the highest bending strength of 570MPa, whereas SN exhibited the lowest value of 224MPa, which meant that the bending strength of FB was 2.5 times higher than that of SN. Results of this study suggested that the bending strength of fiber-reinforced hybrid resin was significantly affected by bonding agents impregnated with fibers. Therefore, selection of bonding agent for hybrid resin restoration requires careful consideration of product composition to ensure an optimal bonding agent-fiber combination, thereby imparting improved mechanical properties to the resultant dental restoration.
著者
-
VALLITTU Pekka
Department of Prosthetic Deutistry and Biomaterials Research. University of Turku Faoulty of Medicin
-
Vallittu Pekka
日本歯科大学生命歯学部 歯科補綴学ii
-
Vallittu Pekka
Univ. Turku Turku Fin
-
Vallittu Pekka
Department Of Prosthetic Dentistry And Biomaterials Science Institute Of Dentistry University Of Tur
-
Vallittu Pekka
日本歯科大学 生命歯学部歯科補綴学ii
-
SHINYA Akikazu
Department of Crown and Bridge, School of Life Dentistry at Tokyo, The Nippon Dental University
-
GOMI Harunori
Department of Crown and Bridge, School of Life Dentistry at Tokyo, The Nippon Dental University
-
SHINYA Akiyoshi
Department of Crown and Bridge, School of Life Dentistry at Tokyo, The Nippon Dental University
-
YOKOYAMA Daiichiro
Department of Crown and Bridge, School of Life Dentistry at Tokyo, The Nippon Dental University
-
Gomi Harunori
Department Of Crown And Bridge School Of Life Dentistry At Tokyo The Nippon Dental University
-
Shinya Akiyoshi
Department Of Crown And Bridge School Of Life Dentistry At Tokyo The Nippon Dental University
-
Yokoyama Daiichirou
Department Of Crown And Bridge School Of Life Dentistry The Nippon Dental University At Tokyo
-
Yokoyama Daiichiro
Department Of Crown And Bridge School Of Life Dentistry At Tokyo The Nippon Dental University
-
Shinya Akiyoshi
Nippon Dental Univ. Tokyo Jpn
-
TSUSHIMA Sumio
Department of Crown and Bridge, School of Life Dentistry at Tokyo The Nippon Dental University
-
Tsushima Sumio
Department Of Crown And Bridge School Of Life Dentistry At Tokyo The Nippon Dental University
-
Vallittu Pekka
Department Of Biomaterials Science Institute Of Dentistry University Of Turku And Biocity Turku Biom
-
VALLITTU Pekka
Department of Biomaterials Science and BioCity Turku Biomaterials Research Program, Institute of Dentistry, University of Turku
-
SHINYA Akikazu
Department of Biomaterials Science and BioCity Turku Biomaterials Research Program, Institute of Dentistry, University of Turku
関連論文
- Bonding of self-adhesive resin cements to enamel using different surface treatments: bond strength and etching pattern evaluations
- Effect of commercially available bonding agents impregnated with fibers on bending strength of hybrid resin
- Microtensile bond strength of fiber-reinforced composite with semi-interpenetrating polymer matrix to dentin using various bonding systems
- グラスファイバーを利用した補綴装置 : 臨床と構造力学的設計
- Bonding of self-adhesive resin cements to enamel using different surface treatments : bond strength and etching pattern evaluations
- Three-dimensional finite element analysis of posterior fiber-reinforced composite fixed partial denture Part 2: influence of fiber reinforcement on mesial and distal connectors
- Shear Bond Strength and FEM of a Resin-modified Glass Ionomer Cement : Effects of Tooth Enamel Shape and Orthodontic Bracket Base Configuration
- Optimum Design for Fixed Partial Dentures Made of Hybrid Resin with Glass Fiber Reinforcement by Finite Element Analysis : Effect of Vertical Reinforced Thickness on Fiber Frame
- Heat curing of UTMA-based hybrid resin : effects on the degree of conversion and cytotoxicity
- Predicting Treatment Outcome in Patient with TMD with/without Disc Reduction
- Machining Accuracy of CAD/CAM Ceramic Crowns Fabricated with Repeated Machining Using the Same Diamond Bur
- Durability of Tungsten Carbide Burs for the Fabrication of Titanium Crowns using Dental CAD/CAM
- Effect of fiber-reinforced composite at the interface on bonding of resin core system to dentin
- Influence of Polymerization Mode on Degree of Conversion and Micropush-out Bond Strength of Resin Core Systems Using Different Adhesive Systems
- Effect of fiber-reinforced composites on the failure load and failure mode of composite veneers
- Studies on mechanical strength, thermal expansion of layering porcelains to alumina and zirconia ceramic core materials
- Effects of Dental Adhesive Cement and Surface Treatment on Bond Strength and Leakage of Zirconium Oxide Ceramics
- Effect of Intermediate Fiber Layer on the Fracture Load and Failure Mode of Maxillary Incisors Restored with Laminate Veneers
- Treated Enamel Surface Patterns Associated with Five Orthodontic Adhesive Systems : Surface Morphology and Shear Bond Strength
- Durability of Diamond Burs for the Fabrication of Ceramic Crowns Using Dental CAD/CAM
- Three-dimensional finite element analysis of posterior fiber-reinforced composite fixed partial denture Part 2 : influence of fiber reinforcement on mesial and distal connectors
- Machining Accuracy of Crowns by CAD/CAM System Using TCP/IP : Influence of Restorative Material and Scanning Condition
- Effect of surface preparation on the bond strength of heat-polymerized denture base resin to commercially pure titanium and cobalt-chromium alloy
- Effects of mechanical properties of adhesive resin cements on stress distribution in fiber-reinforced composite adhesive fixed partial dentures
- In vitro evaluation of the bonding durability of self-adhesive resin cement to titanium using highly accelerated life test
- Measuring the effects of water immersion conditions on the durability of fiber-reinforced hybrid composite resin using static and dynamic tests
- Finite element analysis to compare stress distribution of connector of lithia disilicate-reinforced glass-ceramic and zirconia-based fixed partial denture
- Creep of experimental short fiber-reinforced composite resin
- Effects of rotating fatigue on the mechanical properties of microhybrid and nanofiller-containing composites
- Erratum to: Creep of experimental short fiber-reinforced composite resin
- The effect of surface treatment on bond strength of layering porcelain and hybrid composite bonded to zirconium dioxide ceramics