Experimental Study of Brittle Fracture with Plastic Strain at Cruciform Butt Joints (Report II) : Effect of cyclic loading(Mechanics, Strength & Structure Design)
スポンサーリンク
概要
- 論文の詳細を見る
In The Great Hanshin-Awaji Earthquake Disaster, brittle fractures with plastic strain were observed in beam-column connections of steel building frames. It is considered that the mechanical properties of weld metal, especially the ductility, affected the fractures. In Report I, we described monotonic bi-axial loading test results using cruciform butt specimens welded by three types of welding consumable. We examined the effect of the mechanical properties of weld metal on fractures under monotonic loading. In this Report II, we describe cyclic bi-axial loading test results using cruciform butt specimens that are the same as Report I. The purpose of this paper is to examine the effect of cyclic loading on fractures. The main results are summarized as follows. 1) The fracture-surface appearance mainly depends on the specimen temperature, regardless of the loading pattern. But the brittle fracture-surface ratios tend to decrease in the order the magnitude of Charpy absorbed energies of the weld metal under cyclic loading. 2) Similarly, in the results under monotonic loading, it follows that the specimen that has the larger Charpy absorbed energy also has the larger elongation in the bi-axial test under cyclic loading, even if the elongation values by tensile tests are equal. 3) In the specimen with the ductile weld metal, the load declined gradually under cyclic loading, whereas all specimens fractured immediately under monotonic loading. 4) In the specimens with the brittle weld metal, they fractured suddenly and in a brittle fashion without load-down at -40℃ under cyclic loading and the elongation was much smaller than that in the ductile weld metal. 5) In the specimens with the brittle weld metal, the elongation was smaller than in the ductile weld metal even at room temperature under cyclic loading.
- 大阪大学の論文
著者
-
Horikawa K
Osaka Univ. Osaka Jpn
-
HORIKAWA Kohsuke
Osaka University
-
SAKINO Yoshihiro
Osaka University
-
Sakino Y
Osaka University
-
KAMURA Hisaya
NKK CORPORATION
-
KAWAZU Hideyuki
Osaka University
-
Horikawa Kohsuke
Osaka Univ.
関連論文
- Fatigue Behavior of Connection Plate between Main Girder and Cross Beam in Composite Plate Girder(Welding Mechanics, Strength & Design)
- Joint Characteristics of Dissimilar Materials Friction Welds (II) : In the Case of Titanium/Aluminium Welds(Mechanics, Strength & Structure Design)
- Fatigue Strength of Field-welded Joints of U-shaped Trough Rib for Bridge Deck(Welding Mechanics, Strength & Design)
- Mechanical Properties of Plates Welded under Loading
- Tensile and Fatigue Properties of Large Structural Members by a Newly Developed Welding System(Mechanics, Strength & Structure Design, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Ultimate Strength of Outstanding Plates in Cruciform Columns Assembled from Dissimilar Steels(Mechanics, Strength & Structure Design)
- Buckling Characteristics of High Manganese Non-magnetic Steel and Carbon Steel Hybrid Cruciform Columns : Investigation for Applying Dissimilar Materials to Steel Structures (Report III)(Mechanics, Strength & Structure Design)
- Fatigue Strength of High Manganese Non-magnetic Steel and Carbon Steel Welded Butt Joints : Investigation for Applying Dissimilar Materials to Steel Structures (Report II)(Mechanics, Strength & Structure Design)
- Mechanical Properties of High Manganese Non-magnetic Steel and Carbon Steel Welded Butt Joints : Investigation for Applying Dissimilar Materials to Steel Structures (Repot I)(Mechanics, Strength & Structure Design)
- Production Mechanism of Out-of-Plane Deformation in Fillet Welding(Mechanics, Strength & Structure Design)
- Characteristics of Out-of-Plane Deformation and Residual Stress Generated by Fillet Welding(Mechanics, Strength & Structure Design)
- Joints Characteristics of Dissimilar Materials Friction Welds (I) : Titanium/AISI 304L Stainless Steel(Mechanics, Strength & Structure Design)
- Study on the Brittle Fracture of Welded Beam-to-Column Connections
- Mechanical Behaviors of Structural Members Welded under Loading
- Cyclic Hardening Property and Low Cycle Fatigue Behavior of Aluminum Alloys(Welding Mechanics, Strength & Design)
- Economic Design of Steel Bridge Decks with Open Ribs(Mechanics, Strength & Structure Design)
- Monitoring of Accumulative Traffic Loads on Bridge Members by Sacrificial Test Pieces(Mechanics, Strength & Structure Design, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Elongation Capacity of Welded Joints in Beam-Column Connections(Mechanics, Strength & Structure Design, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Welding Heat Input Limit of 780N/mm^2 Grade Steels and Low Yield Strength Steels Based on Simulated HAZ Tests(Mechanics, Strength & Structure Design)
- Welding Heat Input Limit of Rolled Steels for Building Structures Based on Simulated HAZ Tests(Mechanics, Strength & Structure Design)
- Experimental Study of Brittle Fracture with Plastic Strain at Cruciform Butt Joints (Report III) : Effect of bi-axial loading condition(Mechanics, Strength & Structure Design)
- Experimental Study of Brittle Fracture with Plastic Strain at Cruciform Butt Joints (Report II) : Effect of cyclic loading(Mechanics, Strength & Structure Design)
- Experimental Study on Brittle Fracture with Plastic Strain at Cruciform Butt Joints (Report I) : Effect of Properties of Weld Metal(Mechanics, Strength & Structure Design)
- Review of Damage in Welded Joints Caused by The Kobe Earthquake
- Monitoring of Accumulative Traffic Loads on Bridge Members by Sacrificial Test Pieces
- Atmospheric Exposure Test Results of Lap Joints Fixed by Epoxy Adhesive
- Quality Assurance in Welding of High Strength Steel in Penstock Construction(Welding Mechanics, Strength & Design)
- Initial Fatigue Crack Growth Behavior in a Notched Component (Report I) : Estimation of Elasto-plastic Stress Distribution in a Notch Field(Mechanics, Strength & Structural Design)
- Replacement of a Tension Flange by Welding(Mechanics, Strength & Structural Design)
- Effects of Initial Imperfections on Out-of-Plane Deformation and Residual Stress Produced by Welding(Mechanics, Strength & Structure Design)
- Welding of Steel Structures in Service Conditions(Mechanics, Strength & Structural Design)
- Prevention of HS-type Crack in Welding under Pulsating Loads(Mechanics, Strength & Structural Design)
- Prevention of Solidification Crack in Welding under Pulsating Loads(Mechanics, Strength & Structural Design)
- A Judging Method of Advisability of Welding under Pulsating Loads : Welding on Structures in Service condition (Report III)
- Mechanical Study on Quasi-Solidification Cracks under Pulsating Loads : Welding on Structures in Service Condition (Report II)
- Application of Path Independent Integral to Welded Structural Members (Report I ) : Fundamental Theory of Path Independent Integral to Heterogeneous Materials(Mechanics, Strength & Structural Design)
- The Effect of Welding Tensile Residual Stresses on Fatigue Crack Propagation in Low Propagation Rate Region(Mechanics, Strength & Structural Design)
- Effect of Residual Stresses on Threshold Value for Fatigue Crack Propagation(Welding Mechanics, Strength & Design)
- Studies on Repair Welding in Japan
- Initial Fatigue Crack Growth Behavior in a Notched Component (Report V) : Assessment of Initial Defect in Respect to Fatigue Life of a Notched Component(Mechanics, Strength & Structural Design)
- Initial Fatigue Crack Growth Behavior in a Notched Component (Report IV ) : Effect of Tensile Residual Stress(Mechanics, Strength & Structural Design)
- Initial Fatigue Crack Growth Behavior in a Notched Component (Report III) : Effect of Cyclic Yield Strength(Mechanics, Strength & Structural Design)
- Application of Fracture Mechanics to the Welded Joints of HT80 Steel for Penstock Use(Welding Mechanics, Strength & Design)
- Welding to Pipe Column under Axial Compressive Load(Welding Mechanics, Strength & Design)
- Influence of Stress-strain Curve on Post-yield Behavior of Notched Plate(WELDING MECHANICS, STRENGTH AND DESIGN)
- Mechanical Behaviors of The Low Yield Ratio HT80 as A Structual Steel(Welding Mechanics, Strength & Design)
- Experimental Study on Repair Welding to Steel Bridges under Loading(Welding Mechanics, Strength & Design)
- Fatigue Crack Growth Rate in Welded Joints after Stress Relief Heat Treatment
- An Experimental Study of Effect of Welding Residual Stress upon Fatigue Crack Propagation Based on Observation of Crack Opening and Closure(Welding Mechanics, Strength & Design)
- Influence of Welding Residual Stresses on Fatigue Crack Initiation Life
- Experimental Study on the Reshape of a Plate Girder under Loading(Welding Mechanics, Strength & Design)
- Static Fracture Ductility of Structural Members(WELDING MECHANICS, STRENGTH AND DESIGN)
- Repair Welding on Bridges in Service Condition(Welding Mechanics, Strength & Design)
- Short-circuiting Transient Phenomena in GMA/CO_2 Welding (I) : Through-the-Wire Sensor for Feedback Torch Height Control(Physics, Processes, Instruments & Measurements)
- Safety Evaluation of Cruciform Columns Corrected by Heating(Mechanics, Strength & Structural Design)
- Initial Fatigue Crack Growth Behavior in a Notched Component (Report II) : Evaluation of Fatigue Crack in a Notch Field by Elasto-Plastic Fracture Mechanics(Mechanics, Strength & Structural Design)
- Fundamental Study on Welding to Bridge Members in Service Condition : Welding to Compression Members(Welding Mechanics, Strength & Design)