Evaluation of Elastic Properties in C/C Composites by means of FEM Analysis of Fiber Indentation Tests(Mechanics, Strength & Structure Design)
スポンサーリンク
概要
- 論文の詳細を見る
To investigate the mechanism of energy loss in load-displacement of indenter curve (indentation curve) under fiber indentation test of unidirectionally reinforced C/C composites, the fiber indentation tests were performed and the indentation curve was analyzed by an axis symmetrical finite-element method (FEM) model including a newly designed fiber-matrix interfacial bonding. In this model, only elastic deformations were considered for both fiber and matrix, and the interfacial bonding was assumed to yield not to fracture. From this FEM analysis, a hysteresis loop was obtained in the indentation curve and the interfacial debonding was founded to start from the inside of specimen under the indentation test. And the indentation curve calculated by the FEM analysis was coincide with the experimental results, so compressive Young's modulus of carbon fiber in C/C composite was founded to be predictable from the FEM analysis.
- 大阪大学の論文
著者
-
Kohyama A
Kyoto Univ. Uji Jpn
-
Kohyama A
Institute Of Advanced Energy Kyoto University
-
Kohyama Akira
Kyoto Univ. Uji Jpn
-
佐藤 俊一
Tohoku Univ. Sendai Jpn
-
TSUNAKAWA Hideo
Department of Earth and Planetary Sciences, Tokyo Institute of Technology
-
SERIZAWA Hisashi
Osaka University
-
Sato S
Department Of Physics Nagoya University
-
SATO Shinji
Fukushima National College of Technology
-
TSUNAKAWA Hideo
The University of Tokyo
-
Koide Akio
Chemical Products Div. Hitachi Powdered Metals Co. Ltd.
-
Sato S
Inoue Superliquid Glass Project Exploratory Research For Advanced Technology Japan Science And Techn
-
Tsunakawa H
Department Of Earth And Planetary Sciences Tokyo Institute Of Technology
-
Tsunakawa Hideo
Department Of Earth And Planetary Sciences Tokyo Institute Of Technology
関連論文
- 量子精製研究分野 (2000.1-2000.12)(研究活動報告)
- Optical and Near-Infrared Photometric Observation during the Superoutburst of the WZ Sge-Type Dwarf Nova, V455 Andromedae
- Numerical Simulation of Residual Stress and Deformation Considering Phase Transformation Effects(Mechanics, Strength & Structural Design)
- 量子精製研究分野 (1992.1-1992.12)(研究活動報告)
- 量子精製研究分野 (1999.1-1999.12) (研究活動報告)
- The Infrared Astronomical Mission AKARI
- Submillimeter Observations of the Galactic Plane by IRTS
- The IRTS(Infrared Telescope in Space)Mission
- フェムト秒パルスレーザ熱反射法による金属薄膜の熱拡散率測定
- A Chain of Dark Clouds in Projection Against the Galactic Center
- 雰囲気制御型PLD法による部分窒化・部分硫化チタン酸化物薄膜触媒の創製
- X線表面回折法による部分硫化チタン酸化物薄膜の評価
- Current Performance and On-Going Improvements of the 8.2m Subaru Telescope
- 量子精製研究分野 (1996. 1-1996. 12)(研究活動報告)
- 量子精製研究分野 (1995. 1-1995. 12)(研究活動報告)
- K-Ar ages of the Auckland geomagnetic excursions
- Optical and Near-Infrared Photometry of Nova V2362 Cyg : Rebrightening Event and Dust Formation
- Anti-Correlation of Near-Infrared and X-Ray Variations of the Microquasar GRS 1915+105 in the Soft State
- The 2006 November Outburst of EG Aquarii : the SU UMa Nature Revealed
- レーザーを用いた新しい選択的細胞融合法の確立 (融合細胞の増殖能と機能性の検討)
- 量子精製研究分野 (1997.1-1997.12)(研究活動報告)
- 量子精製研究分野 (1998.1-1998.12) (研究活動報告)
- 量子精製研究分野 (1994. 1-1994. 12) (研究活動報告)
- Effect of Al on Local Structures of Zr-Ni and Zr-Cu Metallic Glasses
- In-house Anomalous X-ray Scattering Analysis for the Amorphous Zr_Al_Ni_ Alloy
- Crystallization Behavior of Amorphous Fe_Nb_B_x (X = 10 and 30) Alloys
- Anomalous X-ray Scattering Study of Amorphous Fe_M_B_ (M = Zr, Nb, and Cr) Alloys
- Effect of Lanthanide Element on Glass-Forming Ability and Local Atomic Structure of Fe-Co-(Ln)-B Amorphous Alloys
- Effect of Interfacial Shear Strength on Mechanical Property of SiC/SiC
- Numerical Simulation of Fuzzy Control for Resistance Spot Welding by Monitoring Electrode Temperature(Physics, Processes, Instruments & Measurements)
- Application of Energy Dispersive Grazing Incidence X-ray Reflectometry Method to Structural Analysis of Liquid/Liquid and Liquid/Solid Interfaces
- High-Temperature Mechanical Property Improvements of SiC Ceramics by NITE Process
- Evaluation of Fiber/Matrix Interfacial Strength of Neutron Irradiated SiC/SiC Composites Using Hysteresis Loop Analysis of Tensile Test
- Synergistic Effects of Heavy Ion and Helium Irradiation on Microstructural and Dimensional Change in β-SiC
- Mechanical Properties of Chemically Vapor-Infiltrated Silicon Carbide Structural Composites with Thin Carbon Interphases for Fusion and Advanced Fission Applications
- Hi-Nicalon^ Fiber-Reinforced CVI-SiC Matrix Composites : I Effects of PyC and PyC-SiC Multilayers on the Fracture Behaviors and Flexural Properties
- Effect of Fiber Properties on Neutron Irradiated SiC/SiC Composites
- Hot Corrosion, Oxidation and Their Effects on the Tensile Strength of SiC Fiber in Alkaline Melts
- FEM Simulation of Welding Distortion in Thin Curved Structures during Assembly Considering Gap and Misalignment(Mechanics, Strength & Structure Design)
- Theoretical Prediction of Welding Distortion Considering Positioning and the Gap between Parts(Mechanics, Strength & Structure Design)
- レ-ザ-プロセッシング,医用・生体応用 (CLEO′91/QELS′91報告)
- Evaluation of Tensile Properties of SiC/SiC Composites with Miniaturized Specimens
- Application of FIB with micro pick-up to microstructural study of irradiated SiC/SiC composites
- Microstructural analysis of the deformation range under nano-indentation in β-SiC
- Effect of Heat Treatment on Microstructure and Mechanical Properties of Stoichiometric SiC/SiC Composites
- Flexural Strength of a Plain-Woven Tyranno-SA Fiber-Reinforced SiC Matrix Composite
- Hi-Nicalon^ Fiber-Reinforced CVI-SiC Matrix Composites : II Interfacial Shear Strength and Its Effects on the Flexural Properties
- Velocity Control of Cesium Atomic Beam Using Two Frequency-Modulated External-Cavity Diode Lasers
- 光誘導ドリフトによる同位体分離
- 周波数変調半導体レーザーを用いたセシウム原子の速度分布制御
- フェムト秒チタンサファイアレーザーシステムの高出力化
- 炭素ターゲットの短パルスレーザーアブレーションにおける発光分光測定
- 高ピークパワーレーザーと素材工学への応用
- Enhanced Isotope Separation of Rubidium by Light-Induced Drift Using Backpumping
- 光誘導ドリフトによる同位体分離
- ミクロンオーダーの金微粒子の光トラッピング
- Evaluation of Elastic Properties in C/C Composites by means of FEM Analysis of Fiber Indentation Tests(Mechanics, Strength & Structure Design)
- Elastic FEM Analysis of Fiber Push-Out Test for C/C Composites
- Gas Desorption of Inner Coating Materials Used for Cathode Ray Tube after Electron Beam Irradiation (第45回真空に関する連合講演会プロシーディングス--2004年10月27日〜29日,大阪)
- Gas Desorption of Inner Coating Materials Used for Cathode Ray--Tube Effect of exposure time in the atmosphere on gas desorption (第44回真空に関する連合講演会プロシーディングス--2003年11月12日〜14日,東京)
- Gas-Desorption Properties of Inner Coating Materials Used for Cathode-Ray Tube : Effect of Water Glass Component of Inner Coating Material on Gas Desorption
- 軸対称偏光ビームの発生と集光特性
- Numerical Simulation of Fracture Behavior of Ceramic Composite Joints By Using A Combined Interface Potential(Mechanics, Strength & Structure Design)
- Development of High-speed and High-precision FEM for Analysis of Mechanical Problems in Welding(Mechanics, Strength & Structure Design)
- Measurement of Inherent Deformations in Typical Weld Joints Using Inverse Analysis (Part 1) : Inherent Deformation of Bead on Welding(Mechanics, Strength & Structural Design)
- Prediction of the Strength of Joints between Dissimilar Elastic Materials(Mechanics, Strength & Structural Design)
- Numerical Simulation of Pear-shaped Bead Cracking in Narrow Gap Welding(Mechanics, Strength & Structural Design)
- Influence of Geometry of Joint on Strength of Ceramic Composite Joint(Mechanics, Strength & Structure Design)
- Finite Element Analysis Using Interface Element for Predicting Deformation during Butt Welding Considering Root Gap and Tack Welds(Mechanics, Strength & Structure Design)
- Computational Analysis of Charpy Impact Tests Using Interface Elements(Mechanics, Strength & Structure Design)
- FEM Evaluation of Asymmetrical Four-Point Bending Test of SiC/SiC Composite Joints(Mechanics, Strength & Structure Design)
- Strength Analysis of Joints between Dissimilar Materials Using Interface Elements(Mechanics, Strength & Structure Design)
- Further K-Ar dating and paleomagnetic study of the Auckland geomagnetic excursions
- Finite Element Method for Hot Cracking Using Temperature Dependent Interface Element (Report II) : Mechanical Study of Houldcroft Test(Mechanics, Strength & Structure Design)
- 金属微粒子の光トラッピング
- FFTF-CYCLE 10 PROGRAM AND FUTURE PLAN
- High Temperature Strength and Oxidation Resistance of Newly Developed SiC Fibers(Mechanics, Strength & Structure Design)
- Simulation of Dynamic Crack Propagation in Elastic Plates Using an Interface Element (Report II)(Mechanics, Strength & Structure Design)
- Crack Propagation Analysis Using Interface Element (Report I) : Theoretical Formulation and Potential Fields of Application(Mechanics, Strength & Structure Design)
- Development of Computational Evaluation Methods for Creep Deformation of SiC/SiC Composites(Mechanics, Strength & Structure Design)
- Finite Element Method for Hot cracking Using Interface Element(Mechanics, Strength & Structure Design)
- 量子精製研究分野 (1993.1-1993.12) (研究活動報告)
- レーザー光を用いた素材精製プロセス
- レ-ザ-光による細胞プロセシング (生体とレ-ザ-)
- 光トラッピング法による微小物体の精密捕捉操作
- 微小物体・細胞のレ-ザ-光トラッピング
- レ-ザ-を用いた悪性しゅようの光化学診断・治療法
- レ-ザ-による生体計測
- レ-ザ-光励起蛍光の応用
- Non-monochromatic whistler waves detected by Kaguya on the dayside surface of the moon
- In-orbit calibration of the lunar magnetometer onboard SELENE (KAGUYA)
- Ground calibration of the high-sensitivity SELENE lunar magnetometer LMAG
- Further application of the deconvolution method of post-depositional DRM to the precise record of the Matuyama-Brunhes reversal in the sediments from the Boso Peninsula, Japan
- Deconvolution of Paleomagnetic Directions from Marine Sediments in the Boso Peninsula, Japan, and Its Implications for the Matuyama-Brunsition Transition Field
- About 100 Year Directional Variations in the Matuyama-Brunhes Transition Field Inferred from the Sedimentary Records in the Boso Peninsula, Japan
- Theoretical Prediction of Welding Hot Cracking and Its Control(Mechanics, Strength & Structure Design, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Development of an Intelligent Database System for Welding and Joining Technology(Physics, Processes, Instruments & Measurements, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Development of New Interface Potential for Simulating Mode I & II Fracture Behavior(Mechanics, Strength & Structural Design)
- Current Status of Fusion Reactor Structural Materials R&D
- Simultaneous observation of the electron acceleration and ion deceleration over lunar magnetic anomalies