ストリップ鋳造した低炭素鋼中の銅硫化物の形態制御(高温プロセス基盤技術)

概要

論文の詳細を見る
Copper and sulfur are the typical residual elements and impurities in steel. Previously, we reported the precipitation of very tiny particles of Cu_2S in copper and sulfur containing steel by strip casting process. In the present paper, the morphologies of copper sulfides in strip casting low carbon steels were distinguishably investigated by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). Four kinds of copper sulfide with different morphology were observed, namely duplex inclusion of oxide and sulfide (OS), plate-like copper sulfide (PS), shell-like copper sulfide surrounding the inclusions (SS), and nano-scale copper sulfide (NS), and their formation mechanisms were discussed. The OS is considered to firstly form as molten manganese silicate in molten steel, and grow up with the formation of sulfide inside of the silicate after the solidification of steel. The PS is considered to precipitate from the γ-Fe phase with plate like shape due to semi coherency with the γ-Fe matrix. The SS is considered to precipitate in lower temperature ranges on the other pre-formed inclusions such as MnS, oxide and also Cu_<2-x>S. The NS is considered to form in the low temperature range of γ-Fe and especially in α-Fe phase as very tiny particles due to the high supersaturation, low diffusivity of component elements and the coherency with the α-Fe matrix. Based on this classification, formation stage of oxide, MnS and Cu_2S was clarified and described as like TTT diagram.
社団法人日本鉄鋼協会の論文
2007-11-01

ストリップ鋳造した低炭素鋼中の銅硫化物の形態制御(高温プロセス基盤技術)

スポンサーリンク

概要

著者

関連論文

スポンサーリンク