Heat Transfer and Natural Ventilation Airflow Rates from Single-sided Heated Solar Chimney for Buildings(Environmental Engineering)
スポンサーリンク
概要
- 論文の詳細を見る
Heat transfer process and natural ventilation driven by a solar chimney attached to a sidewall of building are investigated with CFD technique (MITFLOW) in detail. In this paper, conditions and parameters studied in the modelling study are the cavity width of the solar chimney, the wall temperature, the height and breadth of the solar chimney, the ratio of outlet area to inlet area as well as the outlet location of the solar chimney. The ranges of calculation parameters focused on a solar chimney with single-sided solar collector (single-sided heated wall) cover following conditions: solar chimney length L = 0.5m〜5.0m, breadth B = 0.1m〜0.5m, height H = 2.0m〜5.0m, and B/H = 0.05〜0.25. Heated wall surface temperature Tw is changed in the range of 30℃〜70℃; the ratio of the outlet area to inlet area A is changed in the range of 0.6〜1.0. It is found that for given building geometry and inlet areas, there is an optimum cavity width at which a maximum airflow rate can be achieved. Based on the prediction, the airflow rate reaches maximum when B/H is approximately 1/10. It is also found that for given chimney geometry, solar chimney ventilation flow rate can be increased with the enhancement of chimney height only the cross sectional area no more than the critical area, because cross section area has a strong effect on the transitional and/or turbulent convective heat transfer in an enclosure. From the view of economy technology, the optimized height of a solar chimney can be determined according to the optimized section ratio of breadth to height and available breadth in practice. On the analysis of CFD prediction, it is noted that optimized ventilation flow rate can be obtained when the outlet area takes the same are as the inlet area. Generally, there is good agreement among the numerical results, available experimental data from literature and theoretical analysis of natural ventilation from the solar chimney.
- 社団法人日本建築学会の論文
- 2004-11-15
著者
-
Zhao P
Shenzhen Municipal Planning & Land Bureau
-
Li Angui
Department of Environmental Engineering, Xi' an University of Architecture & Technology
-
Jones Phillip
Welsh School of Architecture, Cardiff University
-
Zhao Pingge
Department of Environmental Engineering, Xi' an University of Architecture & Technology
-
Wang Liping
Department of Environmental Engineering, Xi' an University of Architecture & Technology
-
Wang Liping
Department Of Environmental Engineering Xi' An University Of Architecture & Technology
-
Li Angui
Department Of Environmental Engineering Xi' An University Of Architecture & Technology:roya
-
Zhao Pingge
Department Of Environmental Engineering Xi' An University Of Architecture & Technology
-
Jones Phillip
Welsh School Of Architecture Cardiff University
関連論文
- Urbanization and its Classification in China from the Consideration of Environment(Environmental Engineering)
- Investigation of City Living Environment and Energy Consumption in Yangtze Delta Area
- Evaluation on Introducing a DHC System with Co-Generation System in the City Center of Shenzhen
- Analysis on the Influence of Atmospheric Pollution Caused by Increasing Automobile in Shanghai
- Study on Thermal Environment Evaluation in the Central Business District of Shanghai
- Heat Transfer and Natural Ventilation Airflow Rates from Single-sided Heated Solar Chimney for Buildings(Environmental Engineering)
- Adaptive Subframe Partitioning and Efficient Packet Scheduling in OFDMA Cellular System with Fixed Decode-and-Forward Relays
- Diagnosis and treatment of lingual thyroglossal duct cyst in newborns