Fe-30%Cr合金の動的ひずみ時効
スポンサーリンク
概要
- 論文の詳細を見る
Many types of ferrite stainless alloys have deformation that is accompanied by serration. However, in many such cases, the actual cause of the serration still remains uncertain. Observations on Fe-30%Cr alloys revealed that 0.2%-proof stress increases at two different ranges of the deformation temperature. When the 0.2%-proof stress increased at the lower temperature range, two different types of serration could be observed. The strain hardening coefficient was calculated from the stress-strain curves. The strain hardening coefficient increased in the low temperature range but did not so in the high temperature range. The critical conditions for serration were determined by measuring the changes in the temperature and strain rate. When the critical conditions are determined, then the migration activation energy of moving solute atoms can be calculated. The solute atom that plays a role in causing the serration was determined from the activation energy of the solute atoms. Calculated activation energies were found to be 79.1kJ/mol and 216kJ/mol, respectively. Based on these results, we consider the cause of the serration observed in the low temperature range to be associated with the interaction of carbon and moving dislocations, while the serration evident in the higher temperature range is regarded as being due to the interaction between chromium and interstitial solute atom pairs with moving dislocations. Similar analyses were made for the pre-strain required to cause serration. The required pre-strain was observed for serration both in the low temperature range and that in the high temperature range. We also discuss the pre-strain required for causing serration.
- 社団法人日本材料学会の論文
- 2005-05-15
著者
関連論文
- 826 純MgおよびMg合金多結晶における熱活性化変形機構(塑性変形・変形挙動-I,一般セッション,第53期学術講演会)
- 208 純 Mg および Mg 合金の Hall-Petch 関係と変形機構
- 616 純MgおよびMg合金多結晶における変形機構(多結晶材の変形挙動)(一般セッション)
- Fe-30%Cr合金の動的ひずみ時効
- Fe-30%Cr合金の静的ひずみ時効現象
- 215 Fe-30%Cr合金の動的ひずみ時効(熱処理・時効,一般セッション,第53期学術講演会)
- 211 高 Cr 耐食合金鋼の変形機構と強度
- 618 Fe-30%Cr合金の静的ひずみ時効過程と塑性変形機構(多結晶材の変形挙動)(一般セッション)
- 426 Fe-30%Cr 合金の Portevin-LeChatelier 効果
- 425 Fe-30%Cr 合金における静的ひずみ時効過程
- 424 Fe-30%Cr 合金における変形応力の熱および非熱成分
- 423 タンタルの変形応力の熱および非熱成分
- [001]方位Fe-30%Cr合金単結晶の塑性変形機構
- [001]方位Fe-30%Cr合金単結晶のリューダース変形とひずみ時効(塑性工学)
- 208 Fe-30%Cr 合金多結晶の高温変形と P-L 効果
- 207 [144] 単一すべり Fe-30%Cr 合金単結晶の塑性変形機構
- 437 Fe-30%Cr 合金単結晶の塑性変形機構の研究 : (I) 方位単結晶のリューダース変形と歪時効