FLOW STRUCTURE IN DEVELOPING REGION OF ANNULAR JET(Special Nozzle)

スポンサーリンク

概要

• 論文の詳細を見る

• Flow structure in the near field of an annular jet is investigated experimentally by means of LDV for three ratios of the inner to outer diameter of an annular nozzle. The jet leaves the nozzle exit with an inward velocity component; a recirculating vortex region is formed between the nozzle exit and the stagnation point located on jet center line at the distance ranging from 0.6D to 1.2D, depending on the exit velocity and the nozzle diameter ratio. The dependence on the exit velocity larger than 10m/s is very slight and the stagnation point does not go beyond 1.2D from the exit with approaching the exit velocity to zero. The existence of a wall at the inner nozzle body has a negligible effect on the flow structure except for the static pressure in the recirculating vortex region, which tends to become proportional to the dynamic pressure of the issuing jet.

• 一般社団法人日本機械学会の論文
• 2005-10-05

著者

• Miyata Masafumi

  Department Of Mechanical Systems Engineering Faculty Of Engineering University Of Yamanashi

• Miyata Masafumi

  Department Of Mechanical Engineering Yamanashi University

関連論文

• On a Method of the Concentration Measurement by the Use of Light Absoption Law
• Diffusion of Matter from a Continuous Point Source in Uniform Mean Shear Flows : 1st Report, Characteristics of the Mean Concentration Field
• Evaluation of respiratory modulation on the pulse wave amplitude in low-birth-weight neonate
• Conditional Sampling Measurements in the Developing Region of The 3-D Turbulent Jet from a Square Nozzle : Series B : Fluid Engineering Heat Transfer Combustion, Power Thermophysical Properties
• Hyperkalemia in a neonate with congenital myotonic dystrophy
• FLOW STRUCTURE IN DEVELOPING REGION OF ANNULAR JET(Special Nozzle)

スポンサーリンク