2212 静的及び衝撃荷重負荷時の段付き重ね合わせ接着継手のFEM解析(J10-1 接着界面強度評価,J10 締結・接合部の力学とプロセス)
スポンサーリンク
概要
- 論文の詳細を見る
Stress distributions of stepped-lap adhesive joints subjected to static and impact tensile are analyzed using three-dimensional finite elemental method. The FEM codes employed were ANSYS for static loadings and DYNA-3D for impact loadings. The effects of Young's modulus of the adhesive, adhesive thickness, number of lapped steps, scarf angle of the adherends on the stress distributions at the adhesive interfaces were examined. As the result, it was found that the maximum value of maximum principal stress σ_1 decreased as Young's modulus of the adhesive decreased under impact loadings. The results for the joints under impact loadings ware opposite to the above results. For verification of FEM calculations, experiments to measure the strains in the joints were carried out using strain gauges. A fairly good agreement was found between the calculated and the measured results concerning the strain.
- 2005-09-18
著者
-
沢 俊行
広島大・院
-
佐々木 理洋
広島大・院
-
沢 俊行
広島大学
-
佐々木 理洋
広島大学大学院
-
佐々木 理洋
住友化学
-
沢 俊行
広島大学大学院 工学研究科 機械システム工学専攻
-
沢 俊行
山梨大学工学部機械システム工学科
関連論文
- 衝撃荷重下における構造用エポキシ系接着剤を用いた接着継手の有限要素応力解析
- 557 温度変動及び内圧下におけるノンアスジョイントシートガスケット付き管フランジ締結体のFEM応力解析と密封性能評価 : ボルト初期締付け力のばらつきの影響(フランジガスケット締結体の力学と密封性能評価IV,オーガナイズドセッション)
- 502 温度変化を受けるボルト締結体のゆるみ(フランジガスケット締結体の力学と密封性能評価I,オーガナイズドセッション)
- 555 繰返し温度変化を受けるボルト締結体のねじの回転ゆるみメカニズム(フランジガスケット締結体の力学と密封性能評価IV)
- 559 管フランジ継手用ボルトの塑性域締結シミュレーション(フランジガスケット締結体の力学と密封性能評価IV,オーガナイズドセッション)
- 単結晶TRIP鋼の変態--結晶塑性構成式の定式化とセルオートマトン法による変態・変形挙動の数値シミュレーション (特集 塑性工学)
- 構造用エポキシ系接着剤バルク材の変形挙動のひずみ速度依存性 : 第2報,三次元構成式定式化と有限要素シミュレーション
- 構造用エポキシ系接着剤バルク材の変形挙動のひずみ速度依存性 : 第1報,塑性せん断ひずみ速度の定式化
- 数値シミュレーションによるTRIP鋼の衝撃変形挙動の評価
- 引張り荷重を受ける異種被着体段付き重ね合わせ接着継手の三次元有限要素応力解析と強度推定