Influence of Lamination Pressure upon the Stiffness of Laminated Rotor

概要

論文の詳細を見る
In recent years, a laminated rotor made of the insulated silicon steel laminates is increasingly adopted in the electrical machineries. While this laminated rotor offers good electrical performances, it is quite complicated to predict its stiffness as it is influenced by various factors such as material properties and shape of the laminates, characteristics of the insulation layer, lamination pressure and method of fitting. As it is difficult to model or define boundary conditions in the case of lamination pressure or fitting, the stiffness of the laminated rotor cannot simply calculated using conventional analytical method. Therefore, quantitative investigation on the influence of lamination pressure upon the stiffness of laminated rotor is highly required. In this study, natural frequency of the rotor is measured under various conditions of lamination pressure to investigate the influence of lamination pressure upon the stiffness of laminated rotor. It is found from the experiment that the natural frequency is increased with lamination pressure, and saturated near the 20% of the difference between the inner and outer diameters of the laminate. It is also found that the natural frequency can be controlled to 4-14% in the range of 1-10 MPa of lamination pressure. The saturated value of the stiffness of laminated rotor is expected to approach to that of shrinkage-fitted cylinder having the same inner and outer diameters under the same assembly condition. It is expected that the results would be helpful to design generators or motors using laminated rotors.
社団法人日本機械学会の論文
2006-06-15

Influence of Lamination Pressure upon the Stiffness of Laminated Rotor

スポンサーリンク

概要

著者

関連論文

スポンサーリンク