Supply and Removal of Small Amounts of Liquid Using a Robot Mechanism
スポンサーリンク
概要
- 論文の詳細を見る
We studied the positioning characteristics of a removal nozzle of a robot mechanism and the removal characteristics of oil from a thin groove, aiming at matrix-type optical waveguide switches that utilize optical reflection and transmission effects at the groove depending on the presence or absence of oil. The removal nozzle and the supply needle were controlled by a vision servo with a positioning precision of 5μm. The optimum position of the removal nozzle was at the entrance of the groove to a circular oil pool, and the positioning margin was ±10-15μm around the optimum position. The removal time was proportional to the kinetic viscosity of the oil, and the height of the removal nozzle from a waveguide board was independent of the kinetic viscosity of the oil.
- 一般社団法人日本機械学会の論文
- 1995-06-15
著者
-
Inagaki Shuichiro
Ntt Interdisciplinary Research Laboratories
-
Inagaki Shuichiro
Ntt Interdisciplinary Laboratories
-
Inagaki S
Matsushita Electric Industrial Co. Ltd.
-
Tamaru Naoyuki
NTT Interdisciplinary Research Laboratories
-
Makihara Mitsuhiro
NTT Interdisciplinary Research Laboratories
-
Nagayama Akira
NTT Interdisciplinary Research Laboratories
-
Sasakura Kunihiko
NTT Interdisciplinary Research Laboratories
-
Makihara Mitsuhiro
Department Of Ntt Interdisciplinary Research Laboratories
関連論文
- An Oversampling ADC with Non-linear Quantizer for PCM CODEC
- Supply and Removal of Small Amounts of Liquid Using a Robot Mechanism
- Supply and Removal Characteristics of Oil in Optical Waveguide for Automated Optical Main-Distributing-Frame System (Special Issue on Photonic Switching Technologies)
- Self-Holding Optical Switch Using Optical Matrix Board (Special Issue on Recent Electromechanical Devices)
- Self-Holding Optical Waveguide Switch Controlled by Micromechanisms (Special Issue on Micromachine Technology)
- New Automated Main Distributing Frame System Using a Precision Pin-Handling Robot