Study on Limiting Load for Scuffing and Specific Wear of Spur Gears : Effects of Lubricating Oil and Tooth Form
スポンサーリンク
概要
- 論文の詳細を見る
Limiting load for scuffing using spur gears, which were case-hardened and ground, was investigated. The load was stepped up according to the provided load stage in our experiments to the load stage of scuffing failure. Before and after the running of test gears, the wear of test gears was measured with a balance. At first the running time of test gears at each load stage varied very widely and we found that, the running time at each load stage has no influence on the limiting load for scuffing. For our experiments four kinds of base oil viscosity were used. As antiscuffing additives ZDTP and EP additives at various concentrations were used. Influences of lubricating oil viscosity and concentration of ZDTP and EP additive on limiting load for scuffing and specific wear were investigated and the results summarized. Furthermore the integral temperature of tooth surface according to the ISO proposal was illustrated and discussed.
- 一般社団法人日本機械学会の論文
- 1995-03-15
著者
-
Nemoto R
Department Of Mechanical And Control Engineering The University Of Electro-communications
-
Naruse Chotaro
Department Of Mechanical And Control Engineering The University Of Electro-communications
-
Haizuka Shoji
Department Of Mechanical And Control Engineering The University Of Electro-communications
-
Nemoto Ryozo
Department of Mechanical and Control Engineering, The University of Electro-Communications
-
Nemoto Ryozo
Department Of Mechanical And Control Engineering The University Of Electro-communications
-
Naruse C
Faculty Of Engineering Kanto Gakuin University
関連論文
- Studies on Limiting Load for Scoring of Crossed Helical Gears : Effects of Kind of Material, Heat treatment and Surface Finishing
- Study on Limiting Load for Scuffing and Specific Wear of Spur Gears : Effects of Lubricating Oil and Tooth Form
- Influence of Surface Treatment, Tooth Form and Lubricating Oil on Load-Carrying Characteristics of Crossed Helical Gears
- Influences of Surface Roughness and Viscosity of Lubricating Oils upon Limiting Load for Scoring of Spur Gears : Series C : Vibration, Control Engineering, Engineering for Industry
- Studies on Limiting Load for Scoring and Frictional Loss of Hypoid Gears : Mainly Effects of Surface Treatments and Lubricating Oils
- Limiting Load for Scoring and Frictional Loss of Hypoid Gear : In Comparison with Spur Gear and Crossed Helical Gear, Using Mineral Oil and Synthetic Oil
- Studies on Frictional Loss, Temperature Rise and Limiting Load for Scoring of Spur Gear
- Studies on Frictional Loss and Temperature Rise of Spur Gears : Concentrating on the Use of Mineral Oils and Synthetic Oils
- Studies on Effects of Tip Relief upon Load Carrying Characteristics of Spur Gears : Mainly on Limiting Load for Scoring and Friction Loss
- Studies on Load Carrying Capacity of Crossed Helical Gears : Effects of kinds of Material, Surface Treatment and Lubricating Oil
- Studies on Limiting Load for Scoring and Frictional Loss Of Hypoid Gears of Klingelnberg Type
- Studies on Limiting Load for Scoring of Hypoid Gears : Mainly on Comparisons with Spur Gear Test and Disc Test
- Influences of Tooth Profiles upon Limiting Load for Scoring and Frictional loss of Spur Gear
- Effects of Oil Viscosity and Anti-wear Agent on Load Carrying Characteristics of Hypoid Gears : Mainly on Limiting Load for Scoring and Power Loss
- Effects of Viscosity of Oil and Anti-wear Agent on Limiting Load for Scoring : Concentrating on FZG Spur Gear Test Results
- Studies on Load Carrying Characteristics of Hypoid Gears : Limiting Load for Scoring, Wear and Efficiency
- Studies on Limiting Load for Scoring of Spur Gears : Effects of Zn-P Anti-Wear Agent by Means of FZG Gear Test Rig
- GSD-11 CONTACT STRESS STATE ON TOOTH SURFACE OF CROSSED HELICAL GEARS(GEAR STRENGTH AND DURABILITY, INCLUDING GEAR MATERIALS AND HEAT TREATMENT TECHNIQUES)
- Studies on Friction Loss of Spur Gears : Effect of Viscosity of Lubricating Oils and Tooth Forms