Effects of Oil Viscosity on Seizure
スポンサーリンク
概要
- 論文の詳細を見る
Oil viscosity is an important factor in oil film formation ; its effects on the scoring resistance of gears have been examined. In spite of scoring taking place easily where specific sliding is high, few papers have treated the specific sliding as important. As a basic study to establish gear design procedures for better resistance to scoring, we examined the effects of oil viscosity on antiseizure capacities of mineral base oils. The experiments were carried out using a two-cylinder test rig under various specific sliding conditions. In the higher specific sliding range the antiseizure capacities rise with an increase in oil viscosity. In the lower range, however, the effects are nominal ; thin oils are applicable in severe conditions of heavy load, high sliding velocity, and high bulk temperature where thick EP oils are ordinarily used. A method for applying these results to the scoring design of case-hardened spur gears was proposed.
- 一般社団法人日本機械学会の論文
- 1993-12-15
著者
-
MATSUO Kohei
Kyodo Oil Technical Research Center Co., Ltd.
-
Matsuo Kohei
Kyodo Oil Technical Research Center Co. Ltd
-
Matsuo Kohei
Kyodo Oil Technical Research Center Co. Ltd.
-
Obata Fumio
Faculty Of Engineering Okayama University
-
Obata Fumio
Faculty Of Engineering Tottori University
-
Saeki Shin
Kyodo Oil Technical Research Center Co. Ltd.
-
Takehira Akinobu
Shimonoseki University of Fisheries
関連論文
- Scoring in Spur Gear Pairs (Increase in Scoring Load Capacity Due to Tooth Profile Wear on the Approach Side) : Vibration, Control Engineering, Engineering for Industry
- Active Chatter Suppression of Slender Boring Bar Using Piezoelectric Actuators
- Energy Saving Type Lubricants and Surface Durabilities of Steel Rollers : 3rd Report, The Effect of the Quantity of Molybdenum Disulphide Dispersed in Oil in the Case of Thermally Refined S 45 C Steel Rollers : Vibration, Control Engineering, and Engineer
- Energy Saving Type Lubricants and Surface Durabilities of Steel Rollers : 2nd Report, The Effect of the Quantity of Molybdenum Disulphide Dispersed in Oil in the Case of Through Hardened SUJ2 Steel Rollers : Vibration, Control Engineering, and Engineering
- Effects of Oil Viscosity on Seizure
- Study on the Scoring Resistance of Lubricating Oil in Four Ball Test : 3rd Report, Effects of Bulk Oil Temperature and Sliding Velocity in the Test Method according to JIS
- Gear-Tooth Stress Calculation Method for Heavily Crowned Gear
- Study on the Scoring Resistance of Lubricating Oil in Two Cylinder Test : 2nd Report, Seizure Behavior under Pure Sliding Contact Condition
- Study on the Scoring Resistance of Lubricating Oil in Two Cylinder Test : 1st Report, Temperature Rise of Cylinder
- Study on the Scoring Resistance of Lubricating Oil in Four Ball Test : 4th Report, Relation between the Scoring Resistance and the Maximum Contact Surface Temperature