Mixing and Matching Deep-UV Step-and-Scan with I-Line Step and Repeat
スポンサーリンク
概要
- 論文の詳細を見る
This paper reviews all the major aspects of successfully implementing a "mix and match" (Deep-UV/I-line, stepper/scanner) strategy. The resolution and linewidth-control limits of I-line are quantified for a number of the process levels and compared with the capabilities of Deep-UV step-and-scan. This analysis predicts the typical mix of steppers and scanners in a 256 MBit production line for 250 nm lithography. A step-by-step procedure to achieve and monitor successful matching is reviewed. The procedure begins by defining a "golden system", which is used to produce reference wafers for the setup and monitoring of all the systems being mixed and matched. The reference wafers are used to ensure that the pre-aligners of the systems are calibrated and that offsets are adapted to allow the transfer of wafers between systems. The wafers are also used to match both wafer-stage grid and exposure-field distortions. The matching of both wafer-grid and stepper-field distortions are reviewed. The implementation of stage correction-tables is demonstrated. It is indicated that grid matching to better than 10 nm is achievable. It is also indicated that the dynamic scanning of a step-and-scan system allows the monitoring and correction of such typical stepper problems as field magnification and rotation. The critical aspects of multi-field matching between stepper and scanner are analyzed. The key factors that allow the successful overlaying of large, single, scanned fields with multiple, small, stepped fields are reviewed. The total overlay accuracy achieved using step-and-scan, and "mix-and-match" is analyzed and demonstrated.
- 社団法人応用物理学会の論文
- 1995-12-30