水素を吸蔵したステンレス鋼オーバレイ溶接部境界部の強度 : はく離抵抗性のすぐれたステンレス鋼オーバレイ溶接法に関する研究(第4報)

概要

論文の詳細を見る
The first layer overlay weld metal with austenitic/martensitic duplex microstructure provides the overlay welds with better resistance to the hydrogen-induced disbonding than that with the conventional austenitic microstructure containing several percents ferrite as previously reported. In this report, the notch tensile strength of the bond of the overlay weld the first layer of which is composed of duplex microstructure (the disbonding resistant overlay weld) after absorption of hydrogen was studied and compared to that of the conventional overlay weld. The main results obtained in this study are as follows : (1) The notch tensile strength of the bond of the improved overlay weld was higher than that of the conventional overlay weld.(2) The notch tensile strength of the bond of the conventional overlay weld decreased as decreasing cross-head speed.(3) The notch tensile strength of the bond of both overlay welds decreased as increasing of PWHT temperature and holding time.(4) The notch tensile strength of the coarse grain boundary of the conventional overlay weld after PWHT at 973K for 7.2×10^4 S was lower than that of the bond. It was concluded that the coarse grain in the first layer weld metal adjacent to the bond strongly affected the resistance to hydrogen-induced disbonding of the stainless steel overlay weld.
社団法人溶接学会の論文
1986-11-05