Effect of a Finite Ground Plane on the S-Parameter between Two Dipole Elements
スポンサーリンク
概要
- 論文の詳細を見る
The transmission S-parameter, S_21, between dipole elements on a rectangular finite ground plane is calculated by the MoM with planar-segments in the horizontally and vertically polarized configurations. Supposed a 1/10 scaling, the frequency range is selected 0.15-0.8GHz. The size of the finite ground plane is 40cm×100cm. The dipole-element length is 18.8cm (half-wavelength at 0.8GHz). The distance between dipole elements is 30cm. The results are compared to the calculated results with the conventional MoM-GTD hybrid method and also the measured results with a TRL-calibrated network analyzer. It makes clear that the MoM-GTD hybrid method is not applicable to a small ground plane in the vertically polarized configuration. The results calculated by the MoM with planarsegments agree well to the measured results both in the horizontal and vertical polarizations. The results show that the size of the finite ground plane for the vertical polarization should be much larger than for the horizontal polarization.
- 一般社団法人電子情報通信学会の論文
- 2001-02-01
著者
-
Fujii Katsumi
The Department Of Electronic Engineering University Of Electro-communications
-
Iwasaki Takashi
The Department Of Electronic Engineering The University Of Electro-communications
関連論文
- Measurements of Fast Transient Fields in the Vicinity of Short Gap Discharges
- Evaluation of Charge Transition in a Small Gap Discharge (Special Issue on Discharge and Electromagnetic Interference)
- A Method for Finding the Direction of Arrival of a Single Short Pulse by the Waveform Reconstruction(Special Issue on Recent Progress in Electromagnetic Compatibility Technology)
- Effect of a Finite Ground Plane on the S-Parameter between Two Dipole Elements