A Seismic Test of Large-Scale Liquid-Filled Piping : Related to Liquid Boundary Conditions
スポンサーリンク
概要
- 論文の詳細を見る
In order to study piping dynamic response related to internal liquid behaviour and liquid boundary conditions during earthquakes, a large-scale seismic test has been conducted using a 15 m x 15 m shaking table. A test piping system which is 40 m in length and 254 mm in inner diameter was supported by two main and some auxiliary frame structures on the shaking table. A long straight part of the piping system was extended outside of the shaking table and supported by uniaxial smooth-sliding supports. In the vibration test, some conditions of the internal liquid and their effects were investigated. The experimental results showed that the internal liquid behaved dynamically, not as a simple lumped mass, especially under a pressurized condition, and the liquid boundary conditions influenced on the system behaviour during strong excitations.
- 一般社団法人日本機械学会の論文
- 1990-09-15
著者
-
Chiba Toshio
Ishikawajima-harima Heavy Industries Co. Ltd.
-
Ogawa Nobuyuki
National Research Institute For Earth Science And Disaster Prevention
-
Kobayashi H
Ishikawajima-harima Heavy Industries Co. Ltd.
-
SHIBATA Heki
Institute of Industrial Science, University of Tokyo
-
MINOWA Chikahiro
National Research Institute for Earth Science and Disaster prevention
-
KOBAYASHI Hiroe
Ishikawajima-Harima Heavy Industries Co., Ltd.
-
Shibata H
Institute Of Industrial Science University Of Tokyo
-
Shibata Heki
Institute Of Industrial Science University Of Tokyo
関連論文
- The Analysis of a Wave Equation Possessing a Randomly Distributed Parameter : 1st Report, The Step Response and Its Stochastic Characteristics
- On the Aseismic Design of Liquid Storages
- Steady Impact Vibration of a Body Having Hysteresis Collision Characteristics : 4th Report, Method of Approximate Solutions and Comparison with Exact Solutions
- A Seismic Test of Large-Scale Liquid-Filled Piping : Related to Liquid Boundary Conditions
- A Study on Automatic Diagnosis of Abnormality in Nuclear Reactor Systems
- Response Analysis of Piping Systems to Multi-Inputs : Response Estimation and its Fluctuation
- Auto Design of Piping Systems
- The Necessity of Seismic Trigger Systems for Critical Facilities
- Experimental Study on Active Suppression by Gas Bubble Injection for Earthquake Induced Sloshing in Tanks : Vibration, Control Engineering, Engineering for Industry
- A Study of Core Optimization from the View Point of Neutron Flux Distribution