404 Friction and wear properties of Al-Si based plasma spraying films
スポンサーリンク
概要
- 論文の詳細を見る
There is an increasing need to extend the application of aluminum alloys in mechanical elements. However, the tribological properties of aluminum alloys are generally inferior compared with conventional tribo-materials. Plasma spraying method is one of surface modification technology, which is possible to synthesize the thick coatings enough to bear sliding wear of engineering applications. A series of hyper-eutectic aluminum-silicon alloys has been synthesized with different percentage of silicon ranging from 16wt% to 50wt% by a low pressure plasma spraying method. The friction and wear of Al-Si based films have been studied using a reciprocating sliding under the lubricated condition. The hyper-eutectic Al-Si alloys (Al-40wt%Si-5wt%Cu-1wt%Mg) showed the lowest wear in the Al-Si films, however, the wear rate was not enough for the industrial applications. In order to improve the tribological properties, two tentative approach : heat treatment and whisker reinforcement, have been examined independently. The hardness and wear resistance have been improved significantly by both methods.
- 一般社団法人日本機械学会の論文
著者
-
Sasaki Shinya
Institute Of Mechanical Systems Engineering National Institute Of Advanced Industrial Science And Te
-
Korenaga Atsushi
Advanced Manufacturing Research Institute National Institute Of Advanced Industrial Science And Tech
-
Korenaga Atsushi
Institute Of Mechanical Systems Engineering National Institute Of Advanced Industrial Science And Te
-
Sasaki Shinya
Research Institute of Mechanical Systems Engineering, AIST
-
Hibi Yuko
Research Institute of Mechanical Systems Engineering, AIST
-
Korenaga Atsushi
Research Institute of Mechanical Systems Engineering, AIST
-
Murakami Takashi
Research Institute of Mechanical Systems Engineering, AIST
-
Hibi Yuko
Research Institute Of Mechanical Systems Engineering Aist
-
Murakami Takashi
Institute Of Mechanical Systems Engineering National Institute Of Advanced Industrial Science And Te
-
Korenaga Atsushi
Advanced Manufacturing Research Institute National Institute Of Advanced Industrial Science And Tech
関連論文
- MNS-03 THE EFFECT OF MICRO-TEXTURING ON TRIBOLOGICAL PROPERTIES(Micro/Nanosystem Science and Technology I,Technical Program of Oral Presentations)
- Tribological Behavior of Terphenyl Self-Assembled Monolayer Studied by a Pin-on-Plate Method and Friction Force Microscopy
- Alkyl Chain Length Effect on Tribological Behavior of Alkanethiol Self-Assembled Monolayers on Au
- High-Temperature Friction and Wear Properties of X-BaSO_4 (X:Al_2O_3, NiAl) Composites Prepared by Spark Plasma Sintering
- High-Temperature Tribological Properties of Al_2O_3-X (X : BaCrO_4, BaSO_4 and CaSO_4) Spark-Plasma-Sintered Composites Containing Sintering Additives
- 404 Friction and wear properties of Al-Si based plasma spraying films
- Effects of Surface Chemical Properties on the Frictional Properties of Self-Assembled Monolayers Lubricated with Oleic Acid
- The Effect of Pile-Up and Contact Area on Hardness Test by Nanoindentation
- Alkyl Chain Length Effect on Tribological Behavior of Alkanethiol Self-Assembled Monolayers on Au