305 Real-Time Path Planning for an Industrial Robot using CAD Data : Decision of Operational Pattern by Considering a Tool Configuration

スポンサーリンク

概要

• 論文の詳細を見る

• The study deals with the development of a system to perform path planning using CAD data for an industrial robot. For the 6-DOF robot, generation of control commands considering a operational pattern; starting point, end point and tool direction during operation, is important. The operational pattern is usually decided by an experienced operator. Although the best operational patterns can be decided by precise simulation, it wastes much time. The operational patterns were determined on the basis of "the least change in attitude strategy" considering with "the tool configuration", which expresses the relationship between the attitude of tool and that of robot arm. In the article, chamfering paths on a edge with a closed curve for a non-rotational cutting tool were treated as an example. From the results of the simulation and actual experiment with a robot, the system is found effective to perform automatic path planning in real-time.

• 一般社団法人日本機械学会の論文

著者

• Takeuchi Yoshimi

  Dept. of Mechanical and Control Eng., The University of Electro-Communications

• Asakawa Naoki

  Dept. of Mechanical and Control Eng., The University of Electro-Communications

• Asakawa Naoki

  Dept. Of Human And Mechanical Systems Eng. Faculty Of Eng. Kanazawa University

• Kikuchi Eiji

  Production Machinery Dept. Machinery Sect. Electric Components Company Omron Corp.

• HIRAO Masatoshi

  Dept. of Human and Mechanical Systems Eng., Faculty of Eng., Kanazawa University

• Takeuchi Yoshimi

  Dept. Biochem. And Mol. Biol. Fac. Sci.

• Hirao Masatoshi

  Dept. Of Human And Mechanical Systems Eng. Faculty Of Eng. Kanazawa University

• Takeuchi Yoshimi

  Dept. Of Computer-controlled Mechanical Systems Graduate School Of Eng. Osaka University

関連論文

• Automation of Polishing Work by an Industrial Robot : System of Polishing Robot
• E2 Basic Performance Analysis of Cooling Pipe with a Changing Cross Section(Other manufacturing-related technologies)
• Electrical Discharge Curved Hole Machining by Means of In-pipe Movable Mechanism with Machining Direction Determining Function(Electrical machining)
• Tool Posture Determination for 5-axis Control Machining by Area Division Method(Multi-axis control machining and measurement)
• 305 Real-Time Path Planning for an Industrial Robot using CAD Data : Decision of Operational Pattern by Considering a Tool Configuration
• A GALACTURONOSYLTRANSFERASE INVOLVED IN THE SYNTHESIS OF PECTIN
• 724 6-Axis Ultrasonic Vibrational Cutting Using Bore Byte Tools

スポンサーリンク