An Experimental Study on the Performance of a Perforated-Surface Heat Exchanger with Passage Enlargement and Contraction (An Evaluation of Heat Transfer Performance)
スポンサーリンク
概要
- 論文の詳細を見る
A new concept of the enhancement of forced-convection heat transfer effective in the range of Reynolds numbers lower than 3 000 is presented. The new surface has many small holes and is bent to form a trapezoid. The phase of each adjacent surface is changed by half a period, and therefore a heat exchanger constructed with these perforated surfaces alternately has enlargement and contraction sections along the flow passages. The performance of the new heat exchanger employing this enhancement technique is studied experimentally. It is shown that the mechanism of the heat-transfer enhancement is mainly due to the secondary flow induced by the suction and injection through the perforations. The heat-transfer coefficient of the new heat exchanger increases by about three times that of a parallel-plate heat exchanger at the same Reynolds number.
- 一般社団法人日本機械学会の論文
- 1988-11-15
著者
-
Yamanaka G
Mitsubishi Electric Corp. Shizuoka‐ken Jpn
-
Yamanaka Goro
Central Research Laboratory Mitsubishi Electric Corporation
-
SESHIMO Yuu
Consumer Products Research Laboratory, Mitsubishi Electric Corp.
-
FUJII Masao
Central Research Laboratory Mitsubishi Electric Corp.
-
Seshimo Yuu
Consumer Products Research Laboratory Mitsubishi Electric Corp.
-
YAMANAKA Goro
Central Research Laboratory Mitsubishi Electric Corp.
関連論文
- Heat Transfer Performance of Axial Grooved Heat Pipes : The Capillary Pumping Limit : Series B : Fluid Engineering Heat Transfer Combustion, Power Thermophysical Properties
- An Experimental Study on the Performance of a Perforated-Surface Heat Exchanger with Passage Enlargement and Contraction (An Evaluation of Heat Transfer Performance)
- Study of a Downward Heat Transport Device Utilizing Vapor Pressure as the Liquid Pumping Force (1st Report, The Analysis of the Static Characteristics) : Series B : Fluid Engineering, Heat Transfer, Combustion, Power, Thermophysical Properties
- Heat Transfer and Friction Performance of Plate Fin and Tube Heat Exchangers at Low Reynolds Numbers : 1st Report, Characteristics of Single-Row : Series B : Fluid Engineering Heat Transfer Combustion, Power Thermophysical Properties
- Heat Transfer and Friction Performance of Plate Fin and Tube Heat Exchangers at Low Reynolds Numbers : 2nd Report, Characteristics of Multi-Row : Series B : Fluid Engineering Heat Transfer Combustion, Power Thermophysical Properties