TD-1 BASIC STUDY ON TRANSMITTED CHARACTERISTIC OF CROSSED AXLE TYPE TRACTION DRIVE(TRACTION DRIVES)

スポンサーリンク

概要

• 論文の詳細を見る

• The purpose of this study is to investigate the effect of misalignment on traction coefficient in case of crossed axle type traction drive. The measurements of traction force were performed using small size experimental apparatus, (average roller diameter is 50 mm, rotational speed of driving roller is 90 rpm) And the comparison of experimental with calculations of the two dimensional thermal non-Newtonian elasto-hydrodynamic lubrication was performed. Following conclusions were obtained (1) Maximum traction coefficient in this test is 0.1〜0.13. There is no difference between the traction drives and conventional parallel type traction drives. (2) Traction coefficient becomes large by increase of either contact force or misalignment. (3) The measured results are compared to the calculation and it was confirmed that the calculation method is practical and useful.

• 一般社団法人日本機械学会の論文
• 2001-11-15

著者

• Hayashi Noriyuki

  Nagasaki Research And Development Center Mitsubishi Heavy Industries Ltd.

• Matsumoto Susumu

  Nagasaki Research And Development Center Mitsubishi Heavy Industries Ltd.

• Tozaki Yasuyoshi

  Nagasaki Research And Development Center Mitsubishi Heavy Industries Ltd.

• YOSHIDA Takahumi

  Nagasaki Research and Development Center Mitsubishi Heavy Industries, Ltd.

関連論文

• TD-1 BASIC STUDY ON TRANSMITTED CHARACTERISTIC OF CROSSED AXLE TYPE TRACTION DRIVE(TRACTION DRIVES)
• The Study on Tribological Characteristic of Traction Drives In Non-steady Condition : Optical Interferometric Observations of Transient Oil Film
• Relationship between Rolling Contact Fatigue and Residual Stress on Contact Surface

スポンサーリンク