歯数が2〜5の歯車ポンプに関する研究

概要

論文の詳細を見る
In order to obtain as large a delivery as possible without changing the inner space V_c of a gear pump casing, the authors introduced a method to design and make gear pumps with teeth of Z_1 =Z_2 =2 to 5. They presented a new tooth profile of helical gears suitable for the pumps producing no fluctuations in delivery. Equations were derived for calculating the theoretical delivery V_<th> of the gear pumps and also the thrust which occurs on the gears. Experiments were conducted using four kinds of trial gear pumps with teeth of Z_1 =Z_2 =3 or 4. In the case of the gear pump with Z = 3 and a transverse module of 15.65, the volumetric efficiency was about 98% and the total efficiency was about 90% when the pump was operated at about 1.5 MPa using a machine oil as pumping fluid. The volume ratio V_<th>/V_c of the trial pump was about 0.5 while it was about 0.2 in the case of a conventional gear pump with almost the same delivery.
一般社団法人日本機械学会の論文
1989-03-25