Effect of Exhaust Pipe System upon the Performance Characteristics of a Two-Cycle Diesel Engine : (1st Report, The Influence of Exhaust Pipe Length)
スポンサーリンク
概要
- 論文の詳細を見る
This paper deals with the influence of the exhaust pipe length upon the performance characteristics of a two-cycle Diesel engine. The two-cycle uniflow scavenged three-cylinder Diesel engine was employed, and the length of each exhaust pipe was changed from 20 cm to 420 cm. The following results were obtained. (1) The optimum performance was obtained at the following pulsation coefficients q, i. e. q=0.24,0.70 and 1.16,q being defined as q=nL/15c, where n : crankshaft revolutions per minute, L : length of the exhaust pipe and c : sonic velocity in the exhaust pipe. (2) Theoretical treatment performed by one of the present authors showed fair coincidence with the experimental results. (3) The difference of output developed by the engine at good tuning and that at poor tuning was about 15%. (4) In the practical application of the present results especially to the variable speed engines, a shorter optimum exhaust pipe length is preferable to the longer one.
- 社団法人日本機械学会の論文
著者
-
Ando Toru
Faculty Of Engineering Keio University
-
WATANABE Ichiro
Faculty of Engineering, Keio University.
-
NAKADA Teturo
Faculty of Engineering, Keio University
-
Nakada Teturo
Faculty Of Engineering Keio University
-
Watanabe Ichiro
Faculty Of Engineering Keio University
-
Watanabe I.
Faculty of Engineering, Keio University.
関連論文
- Effect of Exhaust Pipe Systems upon the Performance Characteristics of a Two-Stroke Diesel Engine : 2nd Report, Influences of the Exhaust Pipe Having Diffusers, Nozzles, Bends or Elbows
- Effect of Exhaust Pipe System upon the Performance Characteristics of a Two-Cycle Diesel Engine : (1st Report, The Influence of Exhaust Pipe Length)
- Experimental Study on Radial Turbine, with Special Reference to the Influence of the Number of Impeller Blades on Performance Characteristics
- Studies on Ultrasonic Butt Welding System Using A Large Capacity Static Induction Thyristor Power Amplifier : High Power Ultrasonics
- Ultrasonic Butt Welding of Aluminum, Copper and Steel Plate Specimens
- Ultrasonic Butt Welding of Large Metal Plates by Shiftirng Welding Tip Driving Position
- A Study of the Flow Patterns in an Impeller Channel of a Radial Turbine : In the Case of a Straight Radial Blade Impeller