On the Float-Area-Type Flow Meters : Flow Rate Characteristics When Using a Float with Holes
スポンサーリンク
概要
- 論文の詳細を見る
In order to extend the measuring range of the float-area-type flow meter, a float with a hole was tested. The flow entering the tapered tube of the conventional float-area-type flow meter is passsed, in this case, both the clearance between the tapered tube and the float and the hole of the float, and the total flow rate is indicated by the position of the float. The flow rate characteristics of this type of flow meter was theoretically and experimentally investigated.The curve for the resulting flow rate characteristics was found to shift almost parallel to itself with an increase in the diameter of the hole. Typical basic data for designing this type of flow meter were presented.
- 一般社団法人日本機械学会の論文
著者
関連論文
- Studies on Opposed turbulent Jets : Influences of a Body on the Axis of Opposed Turbulent Jets
- On the Float-Area-Type Flow Meters : Flow Rate Characteristics When Using a Float with Holes
- Measurement of Pulsating Flow Rate by means of Float-Area-Type Flow Meters
- Studies on Turbulent Opposed Jets : Factors Influencing the Position of the Impinging Surface
- Studies on the Flow of Axisymmetric Radialwise Wall Jet on the Impinged Wall by the Annular Impinging Jet
- Experimental Studies on the Combined Flow Field Formed by a Moving Wall and a Wall Jet Running Parallel to It
- Discharge Coefficients of Float-Area-Type Flow Meters
- On the Study of the Flow through an Impeller of Mixed and Inward-Flow Radial Turbines : 3rd Report, Interference with the Flow from the Circular Nozzle
- Studies on the Instabilities of the Float of Float-Area-Type Flow Meters : 2nd Report, Conditions for the Occurrence of the Jumping Instabilities of a Float
- Studies on the Instabilities of the Float of Float-Area-Type Flow Meters : 1st Report, Conditions for the Occurrence of Rotational Vibration of a Float
- Float-area-type Flow Meters with Constant Discharge Coefficients : General Flow Rate Characteristics When the Gradient of a Tapered Tube is Large