Service Load and Fatigue Strength : Report 11,Effects of Gradually Increasing or Decreasing Load on the Initiation and Propagation of Fatigue Crack
スポンサーリンク
概要
- 論文の詳細を見る
Using notched specimens of mild and medium carbon steels, the effects of a gradually increasing or decreasing load and sinusoidally varying load on the crack initiation and propagation are examined and the following results are obtained. i) The linear cumulative damage law is applicable to the crack initiation of low carbon steel. ii) The superposition law is applicable to the crack propagation under a gradually decreasing load, but is not applicable to that under gradually increasing condition. iii) The superposition law is also applicable to the crack propagation under constant load test after imposing a gradually varying load, but is not applicable to the crack propagation under constant load test after imposing a sinusoidally varying load. Moreover, the experiments about the fatigue crack propagation under varying load which were performed by our research group are arranged and the following matter is confirmed. Namely, the approaches from the structural and mechanical point of view are necessary to clarify the fatigue behaviours under varying load conditions.
- 一般社団法人日本機械学会の論文
著者
-
KUNIO Takeshi
Faculty of Engineering, Keio University.
-
Kunio Takeshi
Faculty Of Engineering Keio University
-
HAGIWARA Yoshihiko
Faculty of Engineering, Keio University
-
HATSUNO Kozo
Railway Technical Research Institute, Japanese National Rallways.
-
AOKI Itsuro
Faculty of Engineering, Keio University.
-
NAKAMURA Hiroshi
Ship Department of Technical Research laboratory, Kawasaki Dockyard Co., Ltd.
-
Nakamura Hiroshi
Ship Department Of Technical Research Laboratory Kawasaki Dockyard Co. Ltd.
-
Aoki Itsuro
Faculty Of Engineering Keio University.
-
Hatsuno Kozo
Railway Technical Research Institute Japanese National Railways
-
Hagiwara Yoshihiko
Faculty Of Engineering Keie University
関連論文
- On the Changes of Residual Stress Due to Slip Bands Accumulation
- Propagations of the Surface Fatigue Cracks in Various Kinds of Notched Specimens
- Rotating Bending Fatigue Test of Large Press-Fitted Shaft under Two-Step Pulsating Load
- Investigation of Low Cycle Fatigue at Elevated Temperatures : Dependence of Behavior of Fatigue Cracks on the Conditions of Temperature and Plastic Strain Range
- Investigation of Low Cycle Fatigue at Elevated Temperatures : (Factors Which Govern Number of Strain Cycles to Failure)
- Investigation of Thermal Fatigue : Behavior of Cracks during Thermal Fatigue
- Effects of Metallizing and Brazing Treatments on Static and Cyclic Fatigue of Polycrystalline Alumina
- The Mechanical and Optical Characterization of Polyurethane with Application to Photoviscoelastic Analysis
- Service Load and Fatigue Strength : Report 14,Crack Propagation under Repeated Varying Load
- Service Load and Fatigue Strength : Report 13,The Effects of One Superposed Impulsive Load on the Fatigue Crack Propagation and the Final Fracture under Constant Stress Amplitude
- Service Load and Fatigue Strength : Report 11,Effects of Gradually Increasing or Decreasing Load on the Initiation and Propagation of Fatigue Crack
- Service Load and Fatigue Strength : Report 6,Crack Initiation and Propagation under Repeated Varying Load
- Microstructural Approach of Study on the Fatigue Behavior of Induction-Hardened Steel (Report 2)
- Microstructural Approach of Study on the Fatigue Behavior of Induction-Hardened Steel (Report 1)
- The Study on the Fatigue Strength by Varying the Stress-Amplitude with a Superposed Mini-Sinusoidal Stress Wave on the Base Sinusoidal Stress Wave : Report 1,Some Experimental Results of Fatigue Test by New Simple Device for Superimposing Secondary Mini-S
- An Experiment on the Effect of Induction Hardening on Fatigue Strength : Report 5,An Experiment in Relation to Fatigue Crack Propagation (the Journal and the Transactions of the Japan Society of Mechanical Engineers)
- Quantitative Estimation of the Fatigue Crack Propagation under Varying Load Conditions
- Effective Factors for Crack Propagation under Varying Load Conditions
- The Effect of Plate Thickness on the Fatigue Crack Propagation of Very Thin Steel Plate Specimens
- Test Results of Wheel-Axle Fatigue Testing Machine : (Report 1,Fatigue Test under Constant Load)
- Service Load and Fatigue Strength : Report 3,On the Relationships between Calculated Life of Axles and Actual Statistics in Regard to Crack Initiation
- An Experiment on the Effect of Induction Hardening on Fatigue Strength : Report 8,A Few Experimental Results on the Effect of Mean Stress and Quality of Material
- Study of the Ultimate Properties of Rubbers : Report 1,Dependence of the Ultimate Properties of an SBR on Strain Rate and Temperature