Vibration of a Combination of Circular Plates and Cylindrical Shells : 2nd Report, A Cylindrical Shell with a Circular Plate in the Intermediate Section
スポンサーリンク
概要
- 論文の詳細を見る
The present paper is primarily devoted to the study of the vibrations of a cylindrical shell with a panel or a flange of a circular plate in the intermediate section. Frequencies and displacements are determined by means of minimizing the total Lagrangian. The numerical calculations are restricted to the cylindrical shell having both ends built-in and three displacement waves along the circumference. Frequencies, displacements and bending moments are shown in the figures. In a certain narrow range of frequency, the magnitude of displacement of vibrating circular plate becomes large almost independently of the length of the shell and the position of the panel, while that of the cylindrical shell gets very small. Except the above case, in general, vibrations of a cylindrical shell of the same dimension freely supported or clamped in the same section with the panel, and then the displacement of the panel is small compared with that of the cylindrical shell.
- 一般社団法人日本機械学会の論文
著者
-
Takahashi Shin
Faculty Of Engineering Yamagata University
-
Hirano Yoshitaro
Faculty Of Engineering Yamagata University
関連論文
- Axisymmetric Vibrations of Thin Shells of Revolution
- Transverse Vibration of a Circular Plate on an Eccentric Annular Elastic Support
- Vibrations and Bucklings of a Circular Plate with Various Constraints on Its Annular Circle
- Dynamic Stress Concentrations Due to Flexural Waves in Bars with Various Bends : 2nd Report, Solutions of Bars Excited in Arbitrary Directions
- Dynamical Stress Concentration due to Flexural Waves in Bars with Various Bends
- Vibrations of a Cylindrical Shell with Variable Thickness Capped by a Circular Plate
- Axisymmetric Vibrations of Conical Shells with Variable Thickness
- Vibrations of Conical Shells with Variable Thickness
- Vibrations of Cylindrical Shells with Varying Thickness : Continued
- Vibrations of Cylindrical Shells with Varying Thickness
- Dynamic Responses of Connected Bars to Impact Loads with Consideration of Shearing Deformation and Rotatory Inertia
- Vibrations of Mindlin's Circular Plates with Variable Thickness
- Vibrations of Mindlin's Circular Plates with Thickness Varied along Radius
- Flexural Vibrations of a Bar with Circular Plates
- Dynamic Responses of Viscoelastic Continuous Beams on Elastic Supports
- Responses of an Infinite Medium with Cavities to an Impact Load at One of the Cavities
- In-Plane Vibration of Viscoelastic Circular Rod with Consideration of Shearing Deformation and Rotatory Inertia
- Axisymmetric Vibrations of Thin Drums
- Vibration of a Combination of Circular Plates and Cylindrical Shells : 2nd Report, A Cylindrical Shell with a Circular Plate in the Intermediate Section
- Vibrations of a System Connecting Two Cylindrical Shells
- The Vibration of a Cylindrical Shell with Built-in-Free Ends
- Vibrarfon of Cracked Rectangular Plates
- Vibration of a Combination of Circular Plates and Cylindrical Shells : 1st Report, A Cylindrical Shell with Circular Plates at Ends
- Vibrations of a Circular Plate Having Partly Clamped or Partly Simply Supported Boundary
- In-Plane Vibrations of Inhomogeneous Curved Bars Having Varying Cross-Section : Series C : Vibration, Control Engineering, Engineering for Industry
- Axisymmetric Free Vibrations of Shells of Revolution Having Meridionally Varying Curvature and Thickness : Series C : Vibration, Control Engineering, Engineering for Industry
- Asymmetric Free Vibrations of Shells of Revolution Having General Meridional Curvature
- The Out-plane Impulse Response of a Curved Bar with Varying Cross-sections
- Vibrations of Conical Shells with Variable Thickness : 3rd Report, Analysis by the Higher-order Improved Theory
- Axisymmetric Free Vibrations of Shells of Revolution Having General Meridional Curvature
- Free Vibrations of Thick Toroidal Shells
- Free Vibrations of Toroidal Shells
- In-plane Impulse Response of a Curved Bar with Varying Cross-section
- Vibrations of Conical Shells with Variable Thickness : continued
- Asymmetric Vibrations of Thick Shells of Revolution
- Vibrations of a Combined System of Circular Plates and a Shell of Revolution
- Axisymmetric Vibrations of Thin Shells of Revolution
- Vibration of Shell of Revolution : Improved Theory
- Asymmetric Vibrations of Thin Shells of Revolution
- Vibrations of Noncircular Cylindrical Shells
- Out-of-plane Vibrations of Curved Bars with Varying Cross-section
- The Vibrations of a Circular Plate with Uniformly Distributed Load around the Outer Periphery
- Axisymmetric Vibrations of a Vessel with Variable Thickness
- Axisymmetric Vibrations of a Cylindrical Shell with Varying Thickness
- Free Vibrations of L-Bar : Both Ends Built-in
- The Vibration of a Cylindrical Shell with Three Supports
- Vibration of a U-bar Perpendicular to Its Plane
- In-Plane Vibrations of Elliptic Arc Bar and Sinus Curve Bar
- In-plane Vibrations of Curved Bars Considering Shear Deformation and Rotatory Inertia
- Vibrations of Elliptic Arc Bar Perpendicular to its Plane
- Vibrations of a Connecting System of Curved Bar : In-plane
- Out-plane Vibrations of Curved Bars Considering Shear Deformation and Rotatory Inertia
- In -plane Vibrations of Curved Bars with Varying Cross-section
- The Vibration of a Circular Plate with a Rigid Ring
- The Vibration of a Circular Plate with Weights or a Bar on Its Outer Boundary
- Free Lateral Vibrations of Rectangular Bars with Many Circular Holes (Continued)
- Vibration of a U-Bar in Its Plane
- The Vibration of a Square Frame Work with Legs
- Vibrations or a Connecting System of Curved Bar : Out-of-plane