Longitudinal Shear of Anisotropic Elastic Half-space with an Elastic Flat Inclusion
スポンサーリンク
概要
- 論文の詳細を見る
The present paper deals with the longitudinal shear of an anisotropic elastic half-space with an elastic flat inclusion. The method of the replacement of flat inclusions by continuous distributions of concentrated forces is expanded to apply to the longitudinal shear problem of an anisotropic medium. The advantage of this method is that the singular integral equations can be derived systematically and the strength of the stress singularity at the tips of he elastic flat inclusion can be easily obtained. In order to clarify the influence of anisotropy, free surface, inclination of the inclusion and rigidity of the inclusion, on the strength of stress singularity at the tips of the inclusion, numerical calculations are performed and the results are shown in figures.
- 一般社団法人日本機械学会の論文
著者
-
Kondo Toshimi
Nagaoka College Of Technology
-
SEKINE Hideki
Tohoku University
-
Sekine Hideki
Department Of Aeronautics And Space Engineering Tohoku University
-
Tamate Osamu
Hachinohe National College Of Technology
-
KONDO Toshimi
Department of Mechanical Engineering, Nagaoya College of Technology
関連論文
- A Crack Kinked at the Interface of Bonded Anisotropic Elastic Media under Longitudinal Shear Stresses
- Analysis of a Shear Fracture in Unidirectional Fiber-Reinforced Composites
- Ballistic Limits of Gr/Ep and Hybrid Composite Rear Walls Protected by a Debris Shield
- Fiber Bridging Effect on In-Plane-Shear Mode Crack Extension Resistance of Unidirectional Fiber-Reinforced Composites
- Effective Three-Dimensional Finite Element Analysis and Optimum Design of Composite Patch for Repairing Structural Panels(Composite 4)
- The Simulation of Damage Extension in Continuous Fiber-Reinforced Cross-Ply Laminates
- Bifurcation on Crack Growth Process of Interacting Geothermal Cracks in a Hot Dry Rock during Extraction of Heat
- Discussion of the Length Limit of an Artificial Geothermal Crack in a Hot Dry Rock on the Basis of the Two-Dimensional Theory of Thermoelasticity
- Prediction of the Tension-Softening Relation for Short-Fiber-Reinforced SMC Composites by a Probabilistic Model
- Experimental study of repair efficiency for single-sided composite patches bonded to aircraft structural panels
- An Analysis of the Effect of a Stiffener Bonded to the Edge Surface of an Anisotropic Semi-Infinite Plate Containing an Internal Crack : Series A : Solid-Mechanics, Strength of Materials
- An Analysis of the Effect of a Stiffener Bonded to the Edge Surface of an Anisotropic Semi-Infinite Plate Containing an Internal Crack : Series A : Solid-Mechanics, Strength of Materials
- Interaction a between a Thin Elastic Stiffener and a Crack in an Anisotropic Half Space under Longitudinal Shear
- Longitudinal Shear of Anisotropic Elastic Half-space with an Elastic Flat Inclusion
- Periodic Cracks in the Neighborhood of the Interface of Two Anisotropic Bodies under Longitudinal Shear
- Improving the Brittle Fracture Characteristics in Thick-Walled FGM Cylinders Containing an Inner Radial Edge Crack
- Experimental Verification of Relaxation of Stress Concentrations in an Adaptive Plate with a Circular Hole Using Piezoelectric Actuators
- Thermoelastic Design of Symmetric Laminates Using Lamination Parameters
- Static Deformation Control of a Laminated Composite Plate with Piezoelectric Actuators
- Composition Profile for Improving the Brittle Fracture Characteristics in Semi-Infinite Functionally Graded Materials
- STIFFNESS IDENTIFICATION OF SYMMETRICALLY LAMINATED PLATES USING BENDING DEFLECTION
- Effective Three-Dimensional Finite Element Analysis and Optimum Design of Composite Patch for Repairing Structural Panels(Special Issue on strength and Fracture, and Experimental Mechanics)