Sound Radiation from a Housing Having a Latticed Rib
スポンサーリンク
概要
- 論文の詳細を見る
Regarding a latticed rib as a sound reflector, its effect on sound radiation from a housing is discussed. A module of the reflector, a box with a baffle, surrounding four rectangular reflector plates and an aperture, is taken up for proposing a new formulation in terms of mirror images. Taking multiple reflections into account, the reflecting process is replaced by diffractions from an array of mirror images toward the aperture through the diffraction windows corresponding to the reflectors. And only centripetal diffractions to the aperture are selected for the convergence in calculation. The formulation is applied to a latticed reflector by summing the sound radiation from each module of reflector, When the ratio of bending wavelength in the housing plate to the wavelength of sound in air is greater than 1, the rib has some effect of decreasing the radiation power. Under the contrary condition, the power increases remarkably due to the existence of the rib.
- 一般社団法人日本機械学会の論文
著者
-
UMEZAWA Kiyohiko
Tokyo Institute of Technology
-
Umezawa Kiyohiko
Tokyo Institute Of Technology Research Laboratory Of Precision Machinery & Electronics
-
SUGIYAMA Misao
SONY Corp.
-
HOUJOU Haruo
T.I.T. Res. Lab. of P. M. & E.
-
Houjou Haruo
T.i.t. Res. Lab. Of P. M. & E.
関連論文
- Study on Welded Structure Gears : 13th Report, Proposal of Maximum Fillet Stress Formula on Thin Rim Gears with a Center Web
- Study on Welded Structure Gears 12th Report, Calculation Method of Fillet Stress on Thin Rim Gears with a Center Web
- Study on Welded Structure Gears : 10th Report, Deformation and Stress on a Uniformly Loaded One Side Built-in Cylindrical Shell
- Estimation of Vibration of Power Transmission Helical Gears by Means of Performance Diagrams on Vibration
- Study on Welded Structure Gears : 11th Report, Optimum Structure for Thin-rimmed Spur Gear
- Study on Welded Structure Gears : 8th Report, Analysis of Web and Rib Stresses
- Study on Welded Structure Gears : 7th Report, Analyses of Root Fillet and Rim Stresses
- Study on Welded Structure Gears : 6th Report, Effects of Web Arrangements on Root Stress and Tooth Deflection
- Study on Welded Structure Gears : 5th Report, Analyses of Root Stresses and Tooth Deflections by 3-Dimensional Finite Element Method
- Root Stresses of Helical Gears with Higher Pressure Angle
- Effects of Pressure Angle on Tooth Deflection and Root Stress
- Simulation of Rotational Vibration of Spur Gears
- Effects of Contact Ratio and Profile Correction on Gear Rotational Vibration
- Influence of Gear Error on Rotational Vibration of Power Transmission Spur Gear : 3rd Report, Accumulative Pitch Error
- The Meshing Test on Helical Gears under Load Transmission : 2nd Report, The Approximate Formula for Bending-Moment Distribution of Gear Tooth
- The Elastic Approach of a Gear Pair in Tooth end Bearing : Series C : Vibration, Control Engineering, Engineering for Industry
- Influence of Gear Error on Rotational Vibration of Power Transmission Spur Gear : 2nd Report Waved Form Error
- Sound Radiation from a Housing Having a Latticed Rib
- Influence of Gear Errors on Rotational Vibration of Power Transmission Spur Gears : 1st Report, Pressure Angle Error and Normal Pitch Error
- The Meshing Test On Helical Gears under Load Transmission : 1st Report, The Approximate Formula for Deflections of Gear Tooth
- Study on Welded Structure Gears : 9th Report, Deformation & Stress on One Side Built-in Thin Plate Shell When Concentrated load is Applied