The Effects of Chucking Condition on the Chatter Vibration
スポンサーリンク
概要
- 論文の詳細を見る
In this paper, the effects of the type of chuck and chucking conditions on the stability threshold and on the chatter mark in turning were investigated experimentally. The results obtained are as follows. (1) The type of chuck and chucking conditions have considerable effects on the chatter vibration. (2) The stability limit of chatter vibration represented by the critical overhang length is in good agreement with the result of exciting test on the chuck-workpiece system. (3) The damping ability of the chuck-workpiece system has a large effect on the chatter mark; the magnitude of the chatter mark decreases with an increasing damping of the system.
- 一般社団法人日本機械学会の論文
著者
-
Doi Masahiro
Musashi Institute Of Technology
-
ITO Yoshimi
Tokyo Institute of Technology
-
MASUKO Masami
Musashi Institute of Technology
-
Masuko Masami
Musashi Institute Of Techinology
関連論文
- Determination of Mathematical Model in Structural Analysis of Machine Tools : 1st Report, Model of Basic Structural Component Using Rigidity Distribution Diagram
- A Study on the Estimation of Chatter Commencing in the Turning Process : Vibration, Control Engineering, and Engineering for Industry, New materials, new energy, biotechnology, electronics, etc.
- A Study on Parametric Vibration in Chuck Work
- The Effects of Damping Capacity at the Chuck-Workpiece System on the Chatter Vibration
- The Effects of Chucking Condition on the Chatter Vibration
- Evaluation of System Configuration on FMC for Metal Cutting : Series C : Vibration Control Engineering Engineering for Industry
- Theoretical Analysis for a Damping Ratio of a Jointed Cantibeam
- Experimental Expression of the Tangential Micro-displacement between Joint Surfaces
- Dynamic Characteristics of Spindle-Bearing System in Machine Tools : 2nd Report, Mathematical Expression of Spindle-Bearing System and its Application
- Dynamic Characteristics of Lathe Using Concrete Bed
- Influences of Collared Ribs and Core-Holes on the Static Stiffness of Cylindrical Column : Study on the C.A.D for Machine Tool Structures, Part 1
- Study on the Damping Capacity of Bolted Joints : Effects of the Joint Surfaces Condition
- Determination of Mathematical Models in Structural Analysis of Machine Tools : 2nd Report ; Determination of Mathematical Models for Normal Static Stiffness of Joints
- Structural Description of Machine Tools : 2nd Report, Evaluation of Structural Similarity
- Study on the Horizontal Bending Stiffness of Bulletin of the Bolted Joint
- Basic Study on Bone Cutting Forces for Developing Surgical Instruments
- A Study on Damping Capacity of a Jointed Cantilever Beam : 2nd Report, Comparison between Theoretical and Experimental Values
- A Study on Damping Capacity of a Jointed Cantilever Beam : 1st Report; Experimental Results
- Analysis of Damped Vibration of a System with a Contact Surface : The Case of Residual Displacement : Series C : Vibration, Control Engineering, Engineering for Industry
- Treatment of Contact Stiffness in Structural Analysis : 1st Report, Mathematical Model of Contact Stiffness and its Applications
- Dynamic Characteristics of Spindle-Bearing System in Machine Tools : 1st Report, Effect of Main Bearing and Other Elements
- Deformation Mechanism of Bolted Joint in Machine Tools
- Considerations of Chucking Force in Chuck Work
- Structural Description of Machine Tools : 1st Report, Description Method and Some Applications