The Transient Characteristics of Fluid Pipes including Mechanical Load : 3rd Report, Experimental Analysis on Effects of Valve Closure
スポンサーリンク
概要
- 論文の詳細を見る
This paper deals with transient characteristics of a valve-controled hydraulic driving system consisting of actuator, fluid pipe and operation valve, especially with pressure surge generation in a pipe due to sudden valve closure. Pressure variation was measured under various system and operating parameters, such as valve closure time, valve closure process, valve orifice shape, etc., and compared with theoretical results of the preceding paper. Consequently, the following matters became evident. (1) The theoretical results which were obtained by employing a wave equation of two-dimensional viscous flow for an unsteady pipe flow agree well with experimental results in any system parameters and valve closure process. (2) An approximate solution which was obtained by considering only the compressibility of fluid in pipe is accurate enough for practical usage in case of very slow valve closure. (3) Variation of discharge coefficient of valve depending on Reynolds number, saturation of valve flow at large opening and leakage flow through valve orifice after closure can not be disregarded in case of gradual valve closure.
- 一般社団法人日本機械学会の論文
著者
関連論文
- Characteristics of Fluidborne Noise Generated by a Fluid Power Pump : 4th Report, Pressure Ripple in Hydrostatic Power Transmission
- Fluid Transient Phenomena Associated with Column Separation in the Return Line of a Hydraulic Machine Press
- Characteristics of Fluidborne Noise Generated by Fluid Power Pump : 2nd Report, Pressure Pulsation in Balanced Vane Pump
- Fluid Transient Phenomena Accociated with Column Separation in the Prefill Line of a Hydraulic Machine Press
- Development of an Active Attenuator for Pressure Pulsation in Liquid Piping Systems : Trial Construction of the System and Fundamental Experiments on Attenuation Characteristics
- Development of an Active Attenuator for Pressure Pulsation in Liquid Piping Systems : A Real Time-Measuring Method of Progressive Wave in a Pipe
- Fluid Transient Phenomena Accompanied with Column Separation in Fluid Power Pipeline : 1st Report, On the Horizontal Pipeline Downstream of a Valve Instantaneously Closed
- Prediction of sound power radiated from oil hydraulic pump using FEM and BEM
- The Dynamic Behaviour of a Finite Length Straight Pipe Subject to Waterhammer : 1st Report, For Small Elastic Deformation of the Pipe Wall
- The Transient Characteristics of Fluid Pipes including Mechanical Load : 2nd Report, Theoretical Analysis on Effects of Valve Closure
- Characteristics of Fluidborne Noise Generated by Fluid Power Pump : 3rd Report, Discharge Pressure Pulsation of External Gear Pump
- The Transient Characteristics of Fluid Pipes including Mechanical Load : 3rd Report, Experimental Analysis on Effects of Valve Closure
- Characteristics of Fluidborne Noise generated by Fluid Power Pumps : 1st Report, Mechanism of Generation of Pressure Pulsation in Axial Piston Pump