An Experimental Study of Cross Flow Fan : 2nd Report, Movements of Eccentric Vortex inside Impeller
スポンサーリンク
概要
- 論文の詳細を見る
Relations between the shape of performance curve and flow pattern of cross flow fan are investigated. Total pressure distributions along inner periphery of impeller are measured by traversing a three-hole circular yaw probe. Output signals from a hot-wire probe fitted to impeller are photographed to show the relative flow through blades. Movements of the eccentric vortex inside impeller are measured by these methods, and the following results are obtained. When the flow rate decreases, the vortex center moves along the inner periphery of impeller towards the tongue over the flow rate corresponding to the maximum of ψ_t. Substantially different two types of flow patterns appear according as φ is larger than 0.3 or not. That is, when φ>0.3, the shape of tongue is the determining factor to the flow pattern, if casing of ordinary size are used. However, when φ<0.3, both the angle of delivery arc of impeller and the size of casing affect the pattern as well as fan performance.
- 一般社団法人日本機械学会の論文
著者
-
Nishihara Kazuyoshi
Faculty Of Engineering Osaka Electro-communication University
-
MURATA Susumu
Faculty of Engineering, Osaka University
-
Murata Susumu
Faculty Of Engineering Osaka Univ.
関連論文
- An Experimental Study of Cross Flow Fan : 1st Report, Effects of Housing Geometry on the Fan Performance
- An Experimental Study of Cross Flow Fan : 2nd Report, Movements of Eccentric Vortex inside Impeller
- Laminar Flow in a Corrugated Pipe
- Scale Effects in Cross-Flow Fans : Effects of Fan Dimensions on Performance Curves
- A Study on a Disk Friction Pump : 2nd report, Experiments on Flow through Corotating Disks and Pump Performance
- Two-dimensional Analysis of Stiffness and Damping Factor of Spiral Groove Spherical Bearing
- Two-Dimensional Analysis of Herringbone Groove Journal Bearings
- A Study on a Vortex Blower 2nd Report, Effect of the Blade Angles and a Theoretical Analysis of the Performance
- A Study on a Vortex Blower 1st Report, Effect of the Shape of Impeller and Modification of the Inlet of Blower
- A Study on a Disk Friction Pump : 1st Report, Theoretical Analysis for Flow between Corotating Disks
- A Solution to Inverse Problem of Quasi Three-dimensional Flow in Centrifugal Impeller
- On the Flow in a Centrifugal Impeller : 1st Report, Subsonic Compressible Flow
- Scale Effects in Cross Flow Fans : Effects of Fan Dimensions on Flow Details and the Universal Representation of Performances
- An Analysis of Viscous Effects on Unsteady Forces on Cascade Blades
- Pulsating Laminar Flow in a Cylindrical Pipe with Through Flow
- An Analysis of High-speed Type Cross flow Turbines
- Unsteady Flows Through Cascades : Applications to Several Flows
- Unsteady Flows Through Cascades : Sinusoidal gusts having different phase for each blade
- Studies on the Noise of Axial Flow Fan
- Research on the Axisymmetric Flow through an Axial-Flow Turbo-Machine : 1st Report, On the Flow through a Free Vortex Type Impeller
- Unsteady Oseen Flow Around a Flat-plate Airfoil
- Analysis of Self-acting, Gas-lubricated Journal Bearings
- Computation of the Potential Flow through Cascades using the Conformal Mapping and the Singularity Method
- Research on the Flow in a Centrifugal Pump Impeller : 1 st Report, A Theory on Straight Cascades of Thin Wings
- Research on the Flow in a Centrifugal Pump Impeller : 3rd Report, A Theory of the Impeller, the Breadth of which is a Function of Radius
- Research on the Flow in a Centrifugal Pump Impeller : 5th Report, A Theory of Two-Dimensional Flow on Conical Surface in Centrifugal Pump Impeller
- Unsteady Flow Phenomena in Centrifugal Fans : 1st Report, Rotating Flow Patterns in an Inlet Duct
- Research on the Flow in a Centrifugal Pump Impeller : 2nd Report, An Application of Thin Wing Lattice Theory to Centrifugal Pump Impeller
- On the Partial Flow Rate Performance of Axial-Flow Compressor and Rotating Stall : 3rd Report, On the Devices for Improving the Unstable Performance and Stall Condition
- On the Partial Flow Rate Performance of Axial-Flow Compressor and Rotating Stall : 2nd Report, Influences of Impeller Load and a Study of the Mechanism of Unstable Performances
- On the Flow in the Centrifugal Impeller with Arbitrary Aerofoil Blades : 1st Report, Impeller with Constant Width
- On the Partial Flow Rate Performance of Axial-Flow Compressor and Rotating Stall : 1 st Report, Influences of Hub-Tip Ratio and Stators
- Research on the Flow in a Centrifugal Pump Impeller : 6th Report, A Theory of Two-Dimensional Flow on Curved Surface of Revolution in Centrifugal Pump Impeller
- On the Flow in the Centrifugal Impeller with Arbitrary Aerofoil Blades : 2nd Report, The Effect of Change in Impeller Width